Integrated Dell Remote Access Controller 9 Version 3.15.15.15 User's Guide

Creating an empty partition using the web interface

1. In iDRAC Web interface, go to Configuration > Systems Settings > Hardware Settings > vFlash > Create Empty Partition.
   The Create Empty Partition page is displayed.
2. Specify the required information and click Apply. For information about the options, see the iDRAC Online Help.
   A new unformatted empty partition is created that is read-only by default. A page indicating the progress percentage is displayed. An error message is displayed if:

   • The card is write-protected.
   • The label name matches the label of an existing partition.
   • A non-integer value is entered for the partition size, the value exceeds the available space on the card, or the partition size is greater than 4 GB.
   • An initialize operation is being performed on the card.