Integrated Dell Remote Access Controller 9 Version 3.15.15.15 User's Guide

Using opensource IPMI tool

1. At the command prompt, run the SOL activate command:

   Ipmitool –I lanplus –H <ipaddr> -U <username> -P <passwd> sol activate

   The SOL session is activated.
2. After the server boots to the operating system, the localhost.localdomain login prompt appears. Log in using the operating system user name and password.
3. If SysRq is not enabled, enable using echo 1 >/proc/sys/kernel/sysrq.
4. Run break sequence ~B.
5. Use the SysRq magic key to enable the SysRq function. For example, the following command displays the memory information on the console:

   echo m > /proc/sysrq-trigger displays