- Notes, cautions, and warnings
- About this Guide
- S3100 Series Systems
- Introduction
- Features
- Power Over Ethernet Plus (PoE+)
- S3124 Platform I/O Side
- S3124 Platform PSU Side
- S3124F Platform I/O Side
- S3124F Platform PSU Side
- S3148 Platform I/O Side
- S3148 Platform PSU Side
- S3124P Platform I/O Side
- S3124P Platform PSU Side
- S3148P Platform I/O Side
- S3148P Platform PSU Side
- Reset Button
- Power Supplies
- Fans
- Plug-in Modules
- LED Status Information
- Orderable S3100 Series Components
- Site Location and Preparation
- Install a S3100 Series System
- Unpacking a S3100 Series Switch
- Storing Components
- Installing a Power Supply
- Replacing a Power Supply
- Installing a Fan Tray
- Replacing a Fan Tray
- Installing a Plug-In Module (Optional)
- Install Rack or Cabinet Hardware
- Installing the Dell ReadyRails System
- Configuring a Two-Post Flush-Mount
- Configuring a Two-Post Center-Mount
- Configuring a Four-Post Thread
- Installing a 1U Two-Post
- Installing a 1U Front-Rack
- Connecting the Stacking Ports (Optional)
- Powering Up
- Accessing the Console
- S3100 Series Technical Specifications
- IEEE Standards
- Agency Compliance
- USA Federal Communications Commission (FCC) Statement
- European Union EMC Directive Conformance Statement
- India
- Japan: VCCI Compliance for Class A Equipment
- Korean Certification of Compliance
- Safety Standards and Compliance Agency Certifications
- Electromagnetic Compatibility (EMC)
- Product Recycling and Disposal
- Dell Networking Support
Dell Networking S3100 Series Installation Guide March 2022
About this Guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting, inserting optional modules, and connecting to a power source.
CAUTION To avoid electrostatic discharge (ESD) damage, wear grounding wrist
straps when handling this equipment.
WARNING Only trained and qualified personnel can install this equipment.
Read this guide before you install and power up this equipment. Disconnect
power cords before servicing.
WARNING This equipment contains optical transceivers, which comply with the
limits of Class 1 laser radiation.
WARNING When no cable is connected, visible and invisible laser radiation
may be emitted from the aperture of the optical transceiver ports.
Avoid exposure to laser radiation and do not stare into open apertures.
請給予評分 (1 到 5 顆星)。
請給予評分 (1 到 5 顆星)。
請給予評分 (1 到 5 顆星)。
本文章是否有幫助？請選擇。
評語中不得包含下列特殊字元：<>()\