跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。

OptiPlex 5080 Micro Service Manual

系统错误消息

表 1. 系统错误消息下表介绍了计算机的错误消息:
系统消息 说明
Alert! Previous attempts at booting this system have failed at checkpoint [nnnn]. For help in resolving this problem, please note this checkpoint and contact Dell Technical Support 计算机已连续三次因为同样的错误导致引导例行程序失败。
CMOS checksum error RTC 重设,BIOS Setup(BIOS 设置)默认设置已加载。
CPU fan failure CPU 风扇出现故障。
System fan failure 系统风扇出现故障。
Hard-disk drive failure 硬盘驱动器可能在开机自测过程中出现故障。
Keyboard failure 键盘故障或松动的电缆连接。键盘出现故障或电缆松动。如果重新拔插电缆不能解决问题,请更换键盘。
No boot device available 硬盘驱动器上无可引导分区,或硬盘驱动器电缆松动,或不存在可引导设备。
  • 如果将硬盘驱动器用作引导设备,请确保电缆已连接,并且驱动器已正确安装并已分区,可以用作引导设备。
  • 进入系统设置,确保引导顺序信息正确。
No timer tick interrupt 系统板上的芯片可能发生故障或母板出现故障。
NOTICE - Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. Dell recommends that you back up your data regularly. A parameter out of range may or may not indicate a potential hard drive problem S.M.A.R.T 错误,硬盘驱动器可能出现故障。

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎?
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助?請選擇。
  評語中不得包含下列特殊字元:<>()\