- Notes, cautions, and warnings
- 关于本说明文件
- 系统概览
- 技术规格
- 初始系统设置程序和配置
- 预装操作系统管理应用程序
- POST 和系统管理配置验证的最低要求
- 安装和卸下系统组件
- 升级套件
- 跳线和接口
- 系统诊断程序和指示灯代码
- 获得帮助
- 说明文件资源
The LEDs on the drive carrier indicate the state of each drive. The LEDs on the EDSFF E3.S drive have two LEDs: an activity LED (green) and a locate/fault LED (blue/amber). The activity LED blinks whenever the drive is accessed.
EDSFF indicator behavior
Pattern Name | Description | Blue Element | Amber Element |
---|---|---|---|
Locate | This device is being identified. | ON (1 sec ON 1 sec OFF) | OFF |
Fault | The device is in a fault condition. | OFF | ON (2 sec ON 1 sec OFF) |
N/A | This device does not have fault or locate device. | OFF | OFF |
Green LED
The green LED is driven and controlled by the device. The two functions for this LED are defined as follows:
Function/Device state | LED state |
---|---|
Power ON/Device is powered, no activity occurring. | ON |
Activity/Device is powered, host initiated I/O activity occurring. | 4 Hz nominal blink rate |
Power OFF/Device is not powered. | OFF |