跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Dell Wyse Windows 10 IoT Enterprise for Latitude 5280 Mobile Thin Client BIOS Upgrade Guide

PDF

Upgrading the BIOS by using the SCCM server

  • NOTE: Ensure that you use SCCM server 2016 R2 or later
To create a package, do the following:
  1. Download the WDM BIOS package from support.dell.com
  2. In Configuration Manager Content Source Share , create a folder with the name Packages.
  3. Copy the installation package to the Packages folder.
  4. Open the System Centre Configuration Manager console and go to Software Library > Application Management > Packages.
  5. Click Packages and select Create Package . The WDM screen is displayed.
    Figure 1. WDM Interface
    The Create Package and Program Wizard screen is displayed.
    Figure 2. Create Package and Program Wizard
  6. Click Next. The Program Type screen is displayed.
    Figure 3. Program Type
  7. Select Standard Program and click Next. The Standard Program screen is displayed.
    Figure 4. Standard Program
  8. In the Standard Program package, enter the package name.
  9. In the Command Line field navigate to the folder where the BIOS executable file is located, and select it.
  10. Click Next to continue. The Requirements screen is displayed.
    Figure 5. Requirements
  11. Click Next to continue. The Summary screen is displayed.
    Figure 6. Summary
  12. Verify whether all the information is correct.
  13. Click Next to continue. The Completion screen is displayed.
    Figure 7. Completion
  14. Click Close.
  15. Right-click the package created, and select Distribute Content.
    Figure 8. Distribute Content
  16. After the package content is distributed, check if the status of the package turns green.
  17. Add the client to the domain and verify if it is displayed on the SCCM server screen.
  18. In the target client where you want to upgrade the BIOS, go to Assets and compliance > devices and check the MAC id of the client. Add the device to the device collection.
  19. Deploy the BIOS package to the created device collection. The client restarts and upgrades the BIOS.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎？
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助？請選擇。
  評語中不得包含下列特殊字元：<>()\