VxRail Software

In diesem Dokument werden die minimalen, empfohlenen und neuesten Codeversionen für Dell Technologies Enterprise- und Datacenter Infrastructure-Produkte angegeben. Wir bewerten und überwachen die Codebereitstellungsdaten sorgfältig, um sicherzustellen, dass die Produktversionen unsere strengen Anforderungen erfüllen, damit wir unseren KundInnen zuverlässige Produkte und Lösungen bereitstellen können.

Schritt-für-Schritt-Anleitung zum Ersetzen durch Kundenzertifikate für Dell VxRail-Umgebungen. vSphere bietet Sicherheit durch die Verwendung von Zertifikaten, um die Kommunikation zu verschlüsseln, Services zu authentifizieren und Token zu signieren. (Vom Kunden korrigierbar)

The Microsoft SQL Trace Flag 1800 is a setting that enables SQL Server 4k I/O alignment for the SQL transaction log volume. In this article, we explore the cause of transaction log misaligned I/O and the benefits of using the trace flag 1800. This applies to Dell and other vendor storage solutions with virtualized SQL solutions.

Event VXR508PSU0917 indicates: The server is unable to communicate with Power Supply <number>.

Event VXR500MEM7199 indicates: An unknown critical diagnostic event occurred in the memory device at <location>. (Extended ID: <code>).

Event VXR500MEM7110 A critical diagnostic event occurred in the memory device at <location>. Update device firmware. (Extended ID: <code>).

Event VXR500MEM7108 indicates: A critical diagnostic event occurred in the memory device at <location>. Sanitize the device. (Extended ID: <code>)

Event VXR500MEM7107 indicates: A critical diagnostic event occurred in the memory device at <location>. Retry operation. (Extended ID: <code>).

Event VXR500MEM7104 indicates: A critical diagnostic event occurred in the memory device at <location>. Perform a cold reboot. (Extended ID: <code>)

This article addresses the failure of the VxRail Life-Cycle Management (LCM) process when upgrading from versions 7.0.520 or 7.0.521. It offers a solution for the "vSAN disk object repair timeout" issue.

When a PS1010 or PS1030 NVMe SSD is installed, a PSOD may occur during production or gathering Operating System (OS) logs.

Event VXR500MEM7102 indicates: A critical diagnostic event occurred in the memory device at <location>. Reseat the device. (Extended ID: <code>).

Event VXR500MEM7101 indicates: A critical diagnostic event occurred in the memory device at <location>. Check the device and system configuration. (Extended ID: <code>)

Event VXR508MEM6199 indicates: An unknown diagnostic warning event occurred in the memory device at <location>. (Extended ID: <code>)

Event VXR508MEM6110 indicates: A diagnostic warning event occurred in the memory device at <location>. Update device firmware. (Extended ID: <code>).

Event VXR508MEM6107 indicates: A diagnostic warning event occurred in the memory device at <location>. Retry operation. (Extended ID: <code>)

Event VXR508MEM6106 indicates: A diagnostic warning event occurred in the memory device at <location>. Contact the service provider if the issue persists. (Extended ID: <code>)

Event VXR508MEM6104 indicates: A diagnostic warning event occurred in the memory device at <location>. Perform a cold reboot. (Extended ID: <code>)

Seagate Skybolt and SkyboltServoBP drive fails with medium format corrupted errors.

Before upgrading to release 8.0.300 or above, it is essential to verify the availability of the new port numbers (39090, 35252, 35353, and 38008) within the environment.

Ereigniscode: VXR500PDR63 Dieser Ereigniscode weist auf "A bad disk block on <physical disk> kann während eines Schreibvorgangs nicht neu zugewiesen werden."

SK Hynix PE8010 & PE8030 NVMe M.2 drives have been observed to report a PDR3 Event Code and failed status.

Event VXR508MEM6101 indicates: A diagnostic warning event occurred in the memory device at <location>. Check the device and system configuration. (Extended ID: <code>)

Event VXR500HWC9052 indicates: The health of Graphics Processing Unit (GPU) device <GPU FQDD> is critical because of single or double bit errors on the memory cells.

VxRail upgrade failed from 7.0.410 to 8.0.201 with error "Internal Server Error."

This document describes the objects and equipment used by Customer Engineers (CEs) when on-site. Please check and prepare in advance.

Event VXR508HWC9051 indicates: The health of Graphics Processing Unit (GPU) device <GPU FQDD> is degraded because of single or double bit errors on the memory cells.

Event VXR508HWC9011 indicates: The network link connection status of <Controller ID>, port <port ID>, is unavailable (down).

Event VXR508PDR121 indicates: The PCIe device <PCIe Solid State Device Name> temperature is currently <CTemp> degrees Celsius, which is higher than the critical threshold temperature value <CCTemp> degrees Celsius. Part Number = <Part Number>

Dieser Artikel enthält Anweisungen zum Anzeigen, Generieren, Ersetzen und Verwalten des VxRail Manager-Zertifikats. Diese Informationen sind ab VxRail 8.0.380 aktuell. Die Optionen der Benutzeroberfläche sind möglicherweise eingeschränkt oder fehlen in früheren Versionen. HINWEIS: Dies gilt NICHT für VCF-Cluster oder -Umgebungen.