Dell XC6320 Hyper-converged Appliance

This article provides how to collect logs on Dell Nutanix XC Series Appliance products. Nutanix is one of the Hyper-Converged Infrastructure (HCI) products, which is a dedicated appliance model with Nutanix software installed on the Dell EMC PowerEdge server as the OEM.

Dell EMC guidance to mitigate risk and resolution for the iDRAC multiple vulnerabilities. For specific information about affected iDRAC versions and next steps to apply the updates, see this guide.

Dell PowerEdge Server remediation is available for Tianocore EDK2 Vulnerability that could be exploited by malicious users to compromise the affected systems.

Dell PowerEdge Toshiba MG08 and MG09 hard drives may encounter uninterruptible Background Media Scanning (BMS), causing I/O errors, or timeouts.

The intent of this KB is to provide the proper course of action to take if the notified mystic code takes place.

The Distributed Resource Scheduler (DRS) stops because vCLS VMs are offline, due to privilege check failure for VSPHERE.LOCAL\vpxd-extension‑xxxx, on VxRail, in vCenter 7.x 8.x.

The initial configuration may fail at step 'Removing unused system virtual machines' in large scale environment

This Knowledge Base article explains the steps to take when the VxRail (Virtual Extensible Infrastructure) alarm VXR01406E / MYSTIC01406E – Virtual SAN (Storage Area Network) Health Alarm ‘Advanced Virtual SAN configuration in sync’ is triggered.

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

Adding an SDS device fails with "A device with the given name already exists in the SDS"

Dell EMC XC Series and Core Appliance remediation is available for the Apache Log4j Remote Code Execution Vulnerability that may be exploited by malicious users to compromise the affected system. Dell recommends implementing this remediation as soon as possible in light of the critical severity of the vulnerability.

xc, nutanix, hard drive, hdd, sdd, replace, remove, add

This article explains the problem in /var/log space due to log rotation is not happening frequently enough.

What is the enhanced vMotion Compatibility (EVC) mode?

NVP-vProxy: Image recovery to VxRail failing when VMware stops the operation because datastore is marked as out of space.

Best Practices for performing major or minor upgrades on ESXi in XC products.

Dell XC remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Dell Enterprise Hybrid Cloud remediation is available for multiple VMware vulnerabilities that may be exploited by malicious users to compromise the affected system.

Dell VxRail Appliance contains remediation for multiple security vulnerabilities that may be exploited by malicious users to compromise the affected system.

Dell VxRail Appliance contains remediation for multiple security vulnerabilities that may be exploited by malicious users to compromise the affected system.

Dell XC Series and XC Core remediation is available for an Improper SMM communication buffer verification vulnerability that may be exploited by malicious users to compromise the affected system.

After an installation and or upgrade, the vSphere DCUI IP address shows as 0.0.0.0.

How to create Cluster Shared Volumes by manually calculating the necessary disk space value.

SVM failed to boot with an error message "kernel panic - not syncing: VFS: unable to mount root fs on unknown-block" after the OS patching. The incident occurs in the PowerFlex 13G Hyperconverged node. When upgrading from 3.5.4.4 to 3.6.2.3

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

This article introduces how to check the version of the Nutanix Guest Tool (NGT).

This article introduces how to initialize the Dell Nutanix Node with Phoenix ISO.

Networking, OS10EE, OS10, vxlan, Vxlan tunnels, OSPF, VxRail, VSAN stretch cluster, data center, Dell EMC Networking, S5248, S5248F-ON, S5248F, S5248-ON, S5224, S5224F-ON, S5224F, S5224-ON, S5200, S5200-ON, S52XX, Z9264, Z9264F, Z9264F-ON, Z9264-ON, VMware, ESXi, VxRail manager, VxRail 4.7

Nutanix XC systems may fail to boot if running SATADOM 3IE3 (DPN K9R5M, FXGNM) with firmware S560301N (301N), or may fail during an update to S670330N (330N).

This article introduce how to upgrade the Nutanix Cluster Check by GUI or CLI, online or offline.