C9010 Modular Chassis Switch

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Dell guidance to mitigate risk and resolution for the side-channel analysis vulnerabilities (also known as L1 Terminal Fault or L1TF) for servers, storage, and networking products. For specific information about affected platforms and next steps to apply the updates, see this guide.

This article provides switch configuration guidance for Dell PS Series and SC Series SANs. Switch vendors include Arista, Brocade, Cisco, Dell, Huawei, HP, Juniper, and others.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

As a part of the deployment guidance for Dell EMC Storage Spaces Direct Ready Nodes, for infrastructures that use RoCE v2 for RDMA using Mellanox CX4 LX adapters, we recommend disabling DCBX willing globally in the host OS and setting network adapter DCBXMode to Host in charge.

Troubleshooting the Switch Fabric Module

Information about deploying and configuring PowerEdge servers using System Management tools such as consoles, third-party integrations, and connections

This article documents the procedure to perform a clean install for ONIE, Firmware updater, SSD firmware, and OS10 from USB This would be helpful when you are upgrading the switches from a Factory-installed firmware or an old firmware. You must uninstall OS10 and do a clean installation of the switch is running on 10.4.2.x or earlier release, as per the Dell SmartFabric OS10 Installation, Upgrade, and Downgrade Guide.

WebTools does not launch after upgrading switch to FOS 9.x.

This article outlines how to create a firmware baseline, view compliance reports, and apply updates in Dell OpenManage Enterprise.

Dell Networking Management Information Bases (MIBs) previously found on force10networks.com can be downloaded in the Attachments section of this article.

PVID Mismatch Reported on HP Switch Connected to Dell PowerSwitch models running OS9 or OS10 by a trunked port-channel.

Dell Networking C9010 Chassis output of "show environment" command shows all the fan speed as "0."

This document explains how to create vNIC templates in Unified Computing System (UCS) Manager that use newly created MAC pools.

Addition of VLANs to Unified Computing System (UCS) Manager when using updating service profile templates and vNIC templates.

This article explains how to recover a lost network administrator password on Nexus 5000 switch.