OEMR T550

This article shows how to add additional disks to a virtual disk or reconfigure a virtual disk.

This article provides guidance for the Dell System Update (DSU).

This article provides guidance for Dell PowerEdge servers requiring remediation for the Microsoft Secure Boot certificate expiration (June 2026). It applies to UEFI-based systems with Secure Boot enabled and older Secure Boot certificates affected by the Microsoft Secure Boot certificate expiration (June 2026). The operating system primarily manages Secure Boot certificate updates, and customers should ensure they update their systems using supported Microsoft update mechanisms. It applies to Windows Server operating systems affected by this change, as defined by Microsoft, running on physical systems with customer-managed firmware and Secure Boot configuration. It does not apply to cloud platforms or appliances where the provider manages firmware and Secure Boot keys, such as Microsoft Azure, AX, or APEX-Managed Cloud. Systems already running BIOS versions that include the updated Secure Boot certificates may not require this procedure.

This article explains what disk errors PDR1001 and PDR3 mean on Dell PowerEdge servers and the best practices to resolve these issues. By understanding these alerts and acting promptly, you can maintain storage health, prevent downtime, and protect critical data.

How to Identify the physical slot number in iDRAC based off the device name in vSphere/VSAN.

This document answers questions about SupportAssist Enterprise.

This article explains how to create and import an iDRAC certificate.

The below article is a workaround mechanism to recover PowerEdge systems from critical log entry "SWC5008 Unable to access Front LED Panel because of a hardware error condition" for a few versions of the iDRAC.

This article provides steps to troubleshoot a chassis intrusion, chassis open message for PowerEdge servers.

PowerEdge servers do not support operating system installation, or boot from direct CPU‑attached NVMe SSD drives if the metadata format size is not set to 0.

PowerEdge connected Dell NVMe SSDs with the Limited Retry (LR) bit set may experience an increase in failures due to elevated media and data‑integrity error rates.

Dell PowerEdge Toshiba MG08 and MG09 hard drives may encounter uninterruptible Background Media Scanning (BMS), causing I/O errors, or timeouts.

Dell Micron 7450 and 7500 Non-Volatile Memory Express solid state drives may encounter drive initialization failure due to a firmware issue, resulting in the solid state drives being unrecoverable.

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.

This article provides information about CPU Machine Check errors and common causes and proper handling when errors are seen.

Unsure about the procedure to update a specific component's firmware in a PowerEdge system? Learn how to in this specific article.

Dell Samsung PM893 SSDs with Firmware HJ55 or Earlier Experience Premature SMART Failures

R7725, R6725, R7715, and R6715 the number of CPU Cores is not recognized correctly.

Dell Technologies advises against downgrading Hard Drive or SSD firmware, except in validated scenarios, due to unpredictable results and version reporting issues.

The "Predictive failure reported for disk x" error continues to be logged every 24 hours, even after the identified drive has been replaced. The issue only affects drives connected to PERC Controllers in RAID configuration.

PowerEdge servers crash with PCIe fatal errors while updating Kioxia CM6 NVMe drive firmware.

CPUs can be perceived to be hot while server is idle.

The Dell SS540 SAS solid state drive is reported as not correctly functioning.

PowerEdge servers with Emulex Fiber Channel (FC) driver version 12.01.12 may fail driver installation under Windows Defender Application Control (WDAC) Enforced Mode on Windows Server.

PowerEdge: Broadcom NXE devices with Driver 229.2.73 (SWB: Y7T4X) may report that the interfaces are missing in the operating system when secure boot is enabled.

Attempts to update the Broadcom NetXtreme 5719 and 5720 Network Interface Card (NIC) using the .bin file with sudo in Linux results in an 'Inventory Collection Failure' error.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

Multiple SKHynix NVMe (PS1010) drives in the same server experienced PCIe link training failures during the deployment phase, resulting in the drives entering read-only mode.

Viewing the VLAN details of a deployment template's network settings list devices that are not associated to the template.

This article describes how to view and clear the system event log (SEL) in System Setup.