PowerEdge R7515 Rack Server

The Integrated Dell Remote Access Controller 9 (iDRAC9) provides comprehensive, embedded management across the PowerEdge family of servers. IDRAC9 automation that lets your organization grow, and security that ensures peace of mind. It is a key technology in the OpenManage portfolio. Users can build a management solution that matches your needs, and by leveraging iDRAC, ensures optimal server management.

This article lists the PowerEdge RAID Controllers (PERC) by series family (generation) for Dell systems. There are several types of PERC controllers available depending on internal or external storage connectors, maximum drive support, and RAID support.

This article explains how to replace a cache disk in a vSAN configuration.

Information about how drives behind a PERC are NOT detected in Windows/VMware ESXi Installation if Firmware Device Order (FDO) is enabled.

The firmware of PowerEdge server hard drives is a critical component in the server system. Regularly updating and maintaining this firmware is essential for server performance, security, and compatibility. Hard drive firmware updates can often fix known hardware faults and issues, address identified vulnerabilities and security problems, and potentially introduce new features, improvements, and enhancements.

For the Dell and FCoE Initialization Protocol (FIP)s drive the Manufactures part number are Shared between the 960 GB and 800 GB version of the drive.

Toshiba AL15SE HDDs may enter a Drive Not Ready (DNR) state and report repeated seek retries associated with sense codes 04-4C-91, 04-4C-95, 04-4C-E0, or 04-44-82.

Dell iDRAC9 and iDRAC10 remediations for an sqlite security vulnerability that could be exploited by malicious users to compromise the affected system.

Dell iDRAC9 and iDRAC10 remediations for an Information Disclosure security vulnerability that could be exploited by malicious users to compromise the affected system.

This document highlights minimum, recommended, and latest code versions for Dell Technologies PowerEdge products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Customers have reported greater than expected failure rate of Toshiba MG08 (24HF9, 4N7V0, 8MG73) drives.

Dell Samsung Serial Attached SCSI (SAS) PM1653 and PM1655 solid state drives may report excessive Sense Key faults 0x3, 0x11, 0x0, or 0x4, 0x29, 0x4. These faults have the potential to cause unexpected drive issues.

The Windows Firewall profile is set to 'Public' instead of 'DomainAuthenticated' (that is domain.com) upon rebooting a server.

Dell has introduced significant updates to how PowerEdge servers manage coin-cell (CMOS) battery functionality and related event logging. Beginning with 14th Generation (14G) servers in August 2024 — through iDRAC and BIOS firmware updates — and extending to 15G and 16G platforms from February 2025 onward, several key changes have been implemented

Micron 5x00 Series SSDs may experience read/write performance degradation after reaching approximately 65,535 power-on hours (POH) (~7.5 years of continuous operation). This issue is limited to performance impact only and does not cause data loss or drive failure.

"AMD EPYC processor is not fused to Dell Platform" message is seen on POST.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

This article provides different methods to get the iDRAC IP address of your PowerEdge servers directly from the VMware ESXi host. It is useful when you do not have physical access to the server.

This is a firmware catalog which contains validated and certified firmware stack for selected Dell VMware vSAN Ready Nodes based on Dell customized ESXi 8.X branch Images.

This KB article contains a How to Video that covers how to Install OpenManage Server Administrator (OMSA) on a Windows Server.

On systems equipped with NVIDIA A100 or H200 NVL GPUs running NVIDIA Driver, the NVRM message "NVRM: gpuClearFbhubPoisonIntrForBug2924523_GA100: FBHUB Interrupt detected. Clearing it." may be observed in the Linux kernel log such as dmesg.

This is a firmware catalog which contains validated and certified firmware stack for selected Dell VMware vSAN Ready Nodes based on Dell customized ESXi 9.X branch Images.

This article describes the "Easy Restore", which is a built-in storage component that maintains critical configuration information.

This is a firmware catalog which contains validated and certified firmware stack for selected Dell VMware vSAN Ready Nodes.

Dell PowerEdge Server remediation is available for NVIDIA Networking BlueField and ConnectX vulnerabilities that could be exploited by malicious users to compromise the affected systems.

Find answers and resources to get started or do more from your MyService360 dashboard with enterprise services data analytics and visualizations.

Dell iDRAC9 remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This article outlines the actions required to prepare a system for retirement or repurposing using the LifeCycle controller.

The procedures outlined below describe how to determine the physical slot mapping for NVMe SSDs on PowerEdge servers installed with Linux Operating System using the obtained SOS report.

This guide covers the basic steps of installing and configuring VMware ESXi on Dell Servers. This article also covers upgrading, downgrading, and combining VMware licenses, as well as installing VMware drivers, Dell tools, and generating VMware support bundles.