PowerEdge T430

This article shows how to add additional disks to a virtual disk or reconfigure a virtual disk.

This article explains how to create and import an iDRAC certificate.

Dell PowerEdge servers with common design components are grouped into generations, for example PowerEdge 17th generation servers, 16th generation, 15th generation, or 14th generation. This article provides general guidance for PowerEdge server model naming convention to identify the generation and common components. This article also lists all PowerEdge servers by model including type, CPU, generation, and remote management components.

This article explains what disk errors PDR1001 and PDR3 mean on Dell PowerEdge servers and the best practices to resolve these issues. By understanding these alerts and acting promptly, you can maintain storage health, prevent downtime, and protect critical data.

How to Identify the physical slot number in iDRAC based off the device name in vSphere/VSAN.

This article provides information about exporting the Tech Support Report (TSR) / SupportAssist Collection, including the Operating System, Application Data, and the RAID controller log. This is done using the integrated Dell Remote Access Controller (iDRAC) command-line interface (CLI) of Dell PowerEdge servers generations 12, 13, and 14.

This document answers questions about SupportAssist Enterprise.

This is a general troubleshooting guide to help identifying if there is a problem with a physical disk in vSAN Clusters.

This article provides steps to troubleshoot a chassis intrusion, chassis open message for PowerEdge servers.

PowerEdge 14G, 15G, 16G, and 17G servers skip Preboot eXecution Environment (PXE) boot when an "Unavailable" entry is last in the boot order.

Fans reporting FAN0000/FAN0001 errors (RPM below warning or critical) should be removed and swapped to another connector; if the error follows the fan, replace it.

Dell PowerEdge Toshiba MG08 and MG09 hard drives may encounter uninterruptible Background Media Scanning (BMS), causing I/O errors, or timeouts.

The article provides the solution to the firmware update errors for ConnectX-4 LX NICs SWB 76DNG version 14.32.21.02 & ConnectX-5 dual port SWB 1GF8G version 16.35.40.30.

This article provides information about the LIC008 error seen when importing the IDRAC License.

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.

This article provides information about CPU Machine Check errors and common causes and proper handling when errors are seen.

New deployments of OpenManage Enterprise 4.4.0 are experiencing service failures after configuring the time zone for GMT +02:00 Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius. The issue is only seen on fresh deployment of OpenManage Enterprise (OME) 4.4.0 on Hyper-V. Deploying OpenManage Enterprise (OME) on other hypervisors is not impacted.

PowerEdge: Dell service support for end of industry production of 2.5" 15k RPM SAS hard drives

PowerEdge servers crash with PCIe fatal errors while updating Kioxia CM6 NVMe drive firmware.

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

The article describes how to troubleshoot network connectivity issues for network cards.

Seagate Skybolt and SkyboltServoBP drive fails with medium format corrupted errors.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

This article provides information about Fatal BUS errors seen with PCI1360 and PCI1318.

How to create Cluster Shared Volumes by manually calculating the necessary disk space value.

Dell Intel SATA SSD drives may report a not correctly functioning PDR3 event, potentially resulting in a drive failure condition.

This article describes how to view and clear the system event log (SEL) in System Setup.

Dell solid state drive (SSD) fails after system reports low environment operating temperature.

Microsoft Hyper-V Virtual Machine (VM) Live Migration may fail or no LUNs are mapped after powering on VMs due to Windows architecture and hardware configuration limiting the number of vFC LUNs.

PowerEdge customers using Broadcom NXE adapters in VMware ESXi may experience unexpected results when attempting to tune port parameters. Particularly in configurations with multiple NXE adapters present, understanding the port ordering from both a VMware (vmnicX) and serverPCI-e Slot-Bus-Device-Function (SBDF) may be helpful to select the appropriate commands.