Ready Node Series

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Data Center Infrastructure products. Dell carefully evaluates and monitors code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This article provided links to PowerFlex software documentation.

Remediation is available for a vulnerability that could be exploited by malicious users to compromise the affected systems.

Steps to reset PowerFlex oscillating errors.

The UI login page loads, but entering credentials shows an error; Pod remain running while authentication stalls at the SSO stage

PowerFlex reports that one of the dax devices is about to fail and should be replaced. NVDIMM correctable memory errors can cause a dax device to show as "Failed Now" in PowerFlex when the device is not truly failed.

PowerFlex Software remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

After upgrading CloudLink to version 8.2 or 8.3, the web UI returns HTTP 404, and the VM network is unreachable.

This article shows the PowerFlex release matrix, and guidance on how to correlate the various packages.

This article explains how to reboot different node types for PowerFlex systems.

Even after performing the clean command, the SDS device error does not clear. Below are steps on how this can be addressed.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Dell iDRAC Service Module (dcism) versions earlier than 6.1 contain a defect: when the OS-to-iDRAC pass-through is lost, iSM enters Limited Functionality Mode and retries the connection in an unbounded loop. Every retry runs firewall-cmd --reload twice. The result is thousands of full firewalld reloads per day on the affected node, causing MDM disconnects, SDS decouples, and SCLI login failures.

After sanitizing or replacing an NVDIMM, adding the acceleration/dax devices back into PowerFlex Manager will generate an IO error if the namespace or region is in an error state. This will hinder the ability to add the devices back into PowerFlex as expected.

Use this procedure to recover users' lost passwords for the management VMs.

This article outlines the response from PowerFlex Engineering to the security issues described in VMware Security Advisory VMSA-2026-0006

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

How to update the firmware on a G5, G6, and G7 Panduit PDU.

This article introduces how to reset a PDU, a Panduit PDU, a G5 PDU, a G6 PDU, and a G7 PDU.

17G Nodes may not power on during NDU due to a bug linked to a specific firmware version which can be solved by cold reboot

Many users have CA policies that prohibit IP addresses in the Certificate Subject Alternative Name (SAN) and only Fully Qualified Domain Names (FQDNs) are allowed. The lack of IP addresses in the certificate conflicts with PowerFlex Manager logic when it comes to the zipper or yum repositories that we use. PowerFlex 4.8 has a new feature to support stringent rules for certificates. This is a new security mode within package manager. Now, when creating a custom certificate or the Powerflex appliance certificate, the customer can choose between Standard and Stringent modes. The Standard Mode does not require DNS, but includes IPs and FQDNs, and the Stringent mode in which PowerFlex Manager converts the ingress IPS to FQDNs and then builds the repo URLs.

This article explains how to troubleshoot the dial home alert SDC_MULTIPLE_DISCONNECTIONS_FROM_SDS -SIO01.07.0000007

This article explains how to troubleshoot the alert PFX00102.0000207 - The PowerFlex management platform message bus health diagnostic failed.

The article outlines VMware Security Advisory (VMSA) 2025‑0013, which lists four critical ESXi 7.0 8.0 flaws and gives update guidance, needed RCM IC versions and upgrade routes.

Storage Only nodes deployment may fail during LIA installation because ISM package generates an incorrect firewall rule which can be fixed by editing the Malformed firewall rule

Upgrade from version 4.8.0.1 to 5.1.0.2 due to database unclean shutdown which can be fixed using the script attached to this article

After upgrading Powerflex from 5.1.0.1 to a 5.1.0.2 CloudIQ continues to display the pre-upgrade PowerFlex Manager details because supportassist get discoonected which can be fixed by restarting the CloudIQ colelctor pod

This article explains step by step how to do an NVMe device replacement and do the RDM config in the SVM to be correctly mapped to the ESXi host

This article explains how to fix RG displayed incorrect switch mapping during the upgrade.

This article point to the step by step the procedure to power off a PowerFlex appliance from the admin guide