Dell Networking S3100 Series

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Dell Technologies Hardware Platforms and OS9 Info Hub aggregates links to information that help to understand, configure, and troubleshoot your switch. This includes installation manuals, quick start guides, and hardware diagnostics.

This document highlights minimum, recommended, and latest code versions for Dell Technologies Networking products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This article explains on how to change the default VLAN to allow VLAN 1 to be tagged and associated to ports in Dell networking OS9 platforms.

Dell Networking Intermittent High ICMP Latency seen in S-series Switches running OS9 Firmware

How to set up QoS on Dell Networking PowerSwitches running OS9 for Voice over IP (VoIP).

Dell guidance to mitigate risk and resolution for the side-channel analysis vulnerabilities (also known as L1 Terminal Fault or L1TF) for servers, storage, and networking products. For specific information about affected platforms and next steps to apply the updates, see this guide.

Vulnerability scanners running against Dell Networking OS6, OS9, and OS10 are incorrectly showing the devices are vulnerable to CVE-2023-38408.

This article contains information about the S-Series S3100 Platform.

A brief overview of basic troubleshooting steps for fan issues across all Dell switch platforms with removable fan units.

This article provides switch configuration guidance for Dell PS Series and SC Series SANs. Switch vendors include Arista, Brocade, Cisco, Dell, Huawei, HP, Juniper, and others.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

As a part of the deployment guidance for Dell EMC Storage Spaces Direct Ready Nodes, for infrastructures that use RoCE v2 for RDMA using Mellanox CX4 LX adapters, we recommend disabling DCBX willing globally in the host OS and setting network adapter DCBXMode to Host in charge.

Troubleshooting the Switch Fabric Module

This article explains how to verify the checksum of the firmware image downloaded into the DELL Networking OS10 switch.

The purpose of this guide is to provide general guidelines for troubleshoot layer 1 connectivity issues when using transceivers in Ethernet switches.

A brief overview of basic troubleshooting steps across all Dell switch platforms for a switch that appears to be unresponsive.

This article documents the procedure to perform a clean install for ONIE, Firmware updater, SSD firmware, and OS10 from USB This would be helpful when you are upgrading the switches from a Factory-installed firmware or an old firmware. You must uninstall OS10 and do a clean installation of the switch is running on 10.4.2.x or earlier release, as per the Dell SmartFabric OS10 Installation, Upgrade, and Downgrade Guide.

Enable and configure the SupportAssist feature on Dell EMC Networking S-series Switches by using the necessary command line interface commands.

What baud rate is needed to connect to my Dell Switch

Recovery password on dell switch, recover password on dell Force10 switch

WebTools does not launch after upgrading switch to FOS 9.x.

This article explains how to configure a Manual Dynamic Host Control Protocol (DHCP) Binding or Static DHCP binding in Dell Networking OS9.

Dell Networking Management Information Bases (MIBs) previously found on force10networks.com can be downloaded in the Attachments section of this article.

This How-To article is to clarify how to configure the Windows DHCP server to accept and process the DHCP relay agent Option 82 information. Option 82 is automatically inserted on Dell Networking switches when IP Helper is used.

Ping drops to management on Dell Networking OS9 switches.

The startup configuration file, startup.xml, is stored in the config system folder. To create a backup version, copy the startup configuration to a remote server or the local config: or home: directories.

Out of Band (OOB) management is unreachable using default Virtual Routing and Forwarding (VRF), Virtual Link Trunking (VLT)

Procedure for creating an ONIE USB livedisk with the onie-recovery iso Used for recovery on network switches whose working images have become corrupt and unbootable.

This article explains how to use Link Aggregation Control Protocol (LACP) with clients requiring Preboot execution environment (PXE) boot in OS10 switches.