Dell EMC Unity XT 880

Dell Technologies VxFlex Ready Node 제품에 대한 CRU(Customer Replaceable Unit) 비디오 정보

이 문서에는 Dell Technologies VNX 및 VNXe 제품의 CRU(Customer Replaceable Unit) 비디오에 대한 정보가 포함되어 있습니다.

Dell Technologies PowerProtect 및 Data Domain 제품에 대한 CRU(Customer Replaceable Unit) 비디오 정보

Dell Technologies PowerFlex 제품에 대한 CRU(Customer Replaceable Unit) 비디오 정보

Dell Technologies ECS 제품에 대한 CRU(Customer Replaceable Unit) 비디오 정보

Information about customer replaceable unit (CRU) videos for Dell Technologies Unity products

Information about customer replaceable unit (CRU) videos for Dell Technologies Connectrix products

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

The I/O module is powered off. Try rebooting the Storage Processor (SP). If the I/O module remains powered off after a reboot, you may have to replace the I/O module. (Dell Correctable)

This KB provides the method to check active open file count for NFS (NFSv4 only) and active connected NFS client (both NFSv3 and NFSv4) on a live Unity system.

업데이트 후 Windows Server가 Unity의 NAS 서버에서 내보낸 이벤트 로그에 더 이상 연결할 수 없습니다.

This KB details the Management account roles on the Dell Unity and Dell Unity XT systems.

This article explains how to address or order a failed drive in a Dell Unity system for SymptomCode: Neo14:60258 (User Correctable)

Alert 14:38005a is generated when using SupportAssist. The SupportAssist metadata partition has less than xx% of its drive space left. Your SupportAssist function may be affected.

This article describes the errors that are displayed when attempting to join a NAS server to an Active Directory domain (User Correctable)

Some security audit tools may report that a Unity NAS server does not regularly change its computer account password. By default, the Unity NAS server does not change its computer account password regularly. Windows computers change their machine account password every 30 days. (User Correctable)

Attempts to configure LACP results in error: Failed: The system was unable to change the link aggregation settings. This may have occurred because of memory fragmentation. Consider rebooting the relevant SP. (Error Code:0x6000dfc)

This document describes the objects and equipment used by Customer Engineers (CEs) when on-site. Please check and prepare in advance.

This KB describes one of the causes of SupportAssist configuration failures.

Newly added users are unable to access share in a multiprotocol file system.

이 KB는 LDAP 사용자를 사용하여 VNX의 Unisphere를 관리하는 방법에 대해 설명합니다

PUHC(Pre-Upgrade Health Check) 스크립트가 실패합니다. tar는 브라우저가 tar.gz 파일의 압축을 잘못 풀었기 때문에 발생하는 '이것은 tar 아카이브처럼 보이지 않습니다'와 헤더 오류를 보고합니다.

이 KB는 NFS 공유를 생성할 때 0x900a008 오류가 발생하는 원인 중 하나를 설명합니다.

Is LLDP supported on a Dell Unity array?

This article discusses whether Unity is susceptible to CVE-2026-20833.

When a system drive fails in a traditional pool, a hotspare is used to copy customer data luns. Once the system drive is replaced, the system drive does not become available as a hotspare. This could lead to a hotspare rule failure as there is one less hotspare available.

When we cancel a pool expansion job using UEMCLI, the storage reports that the action was completed successfully although the operation continues in the background. This behavior is corrected in OE 5.1.

Under certain out-of-space conditions, an upgrade to 5.1 may trigger file system offline or rolling SP reboots.

내부 SSD가 완전히 마모된 경우 Dell EMC Unity 소프트웨어가 Unisphere에서 오류를 보고합니다. 그러나 알림 또는 다이얼 홈 오류는 보고되지 않습니다.

When performing a Pre-Upgrade Health Check (PUHC) on Unity OE 5.1 or later code, it may report an error: dm::check_if_user_root_fs_has_enough_space_1