QLogic Family of Adapters

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.

The article describes how to troubleshoot network connectivity issues for network cards.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

This article provides information about failures seen updating firmware on the Broadcom 5741x/57454/5750x adapters showing SUP0550.

Steps necessary to configure the QLogic FastLinQ 41262 network adapter as defined in the "Microsoft HCI Solutions from Dell Technologies" Deployment Guide to enable RDMA, iWARP, and disable DCB.

Microsoft Hyper-V Virtual Machine (VM) Live Migration may fail or no LUNs are mapped after powering on VMs due to Windows architecture and hardware configuration limiting the number of vFC LUNs.

iDRAC version 6.10.00.00 and later, when 3 out of 4 partitions are enabled on a Dell Marvell QL41262 adapter, the iDRAC user interface displays the link speed as "Unknown."

Network port enumeration on Windows Server 2022 with Dell network adapters may swap port designations.

This article informs about QLogic QLE2560 FC8 Single Channel Host Bus Adapters (HBAs) that use specific drivers with ESXi 7.0 U3 Build version 19193900 or newer and the issues that have been found.

What is a common Network Partition and Teaming Mode mistake that may result in unexpected network issues.