SUSE Linux Enterprise Server 15

A group of disclosed vulnerabilities in GRUB (Grand Unified Bootloader), known as "BootHole", can allow for Secure Boot bypass.

On Dell PowerEdge 17G servers using Broadcom 5719 QP OCP NX1 cards (DPN M2PYY), firmware installation fails when Secure Boot is enabled on SUSE Linux Enterprise Server (SLES). Additionally, the installed firmware version is not detected by the Operating System (OS). Disabling Secure Boot allows the firmware to install and be detected correctly.

vCenter web console repeatedly shows the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)" when attempting to upgrade Suse Linux from SLES 12 SP5 to SLES 15 SP4 on a remote collector.

Customers may encounter package update failures when using Linux OS to perform the Dell Update Package (DUP) as a binary (.BIN) file.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

Explore this article to troubleshoot wireless networking for your home network on Windows 11. Also, for help with setting up, connecting, sharing files, photos, music, and troubleshooting your wireless network see the appropriate section.

Reported vulnerability with Nessus scan: "Unix Operating System Unsupported Version Detection: SUSE Linux Enterprise 15.0 support ended on 2019-12-31 (end of regular support) / 2022-12-31 (LTSS option). Upgrade to SUSE Linux Enterprise 12.5 / 15.1."

This article provides information about how to use the LCC to deploy a supported OS.

This article discusses R7425, R6415, R7415 14G AMD servers with Linux OS using H330 controllers or ESXi using H330 configured as VMDirectPath I/O pass-through to a Linux Virtual Machine with the potential to experience data corruption.

What is a Zombie Process, how to find it, and how to kill or terminate it.

This article explains how to generate a supportconfig log bundle for SUSE Linux Enterprise Server (SLES).

This article provides information about how to test available network bandwidth using iperf3.

The information below covers the steps involved in installing SLES 15 OS in Dell EMC PowerEdge Servers using HTTP Boot.

This article provides information about how to determine the PCI-E bus speed of a PCI-E card in Red Hat Enterprise Linux (RHEL)

The SYMMQRY for z/VM utility provides the Symmetrix serial number from any z/VM disk, minidisk, or volume. The SYMMDEV#, Count Key Data (CKD) device information, and Enginuity level is also obtained from the SYMMQRY.

Steps for getting printing to work on Red Hat and SUSE Linux.

Guidance on how to evaluate the sosreport obtained from your system; below is a concise breakdown of the directions (Folder locations and its description) collected in the sosreport.

The firmware of PowerEdge server hard drives is a critical component in the server system. Regularly updating and maintaining this firmware is essential for server performance, security, and compatibility.

This article provides information about "Windows 10 upgrade fails to activate due to an interruption of network connectivity during the update."

In this article, you find a list of common issues with MyAccount (formerly Dell Digital Locker) and appropriate solutions and workarounds.

Steps to install Cyber Recovery on Virtualized and Physical Server with SuSe Linux 15 SP5.

SUSE Linux Enterprise Server for SAP was rebooted intermittently, one or two times every week.

Linux Operating System failed to boot and automatically power off while booting.

SUSE Linux Enterprise Server with BTRFS file system as root may experience performance issue and is lagging intermittently.

The steps listed below explain how to locate the serial number, vendor, firmware version, and physical slot mapping of an SAS/SATA/SSD hard drive on PowerEdge servers running Linux Operating System or from the gathered SOS report.

The procedures outlined below describe how to determine the physical slot mapping for NVMe SSDs on PowerEdge servers installed with Linux Operating System using the obtained SOS report.

With OMSA 10.3 and older specifying the CLI command to set up an alertaction to launch a specific binary or shell script may result in an "XML Transformation failed" error with the execappath option.

This article describes operating system recovery options available in Windows 11 SE.

How to check, validate, and convert SSL certificates using OpenSSL and Keytool. This article includes commands for PEM, DER, PKCS12, and certificate fingerprint checks.

Explore the Windows 10 Magnifier Tool and its modes: Full Screen, Lens, and Docked. Check how to switch between these modes to enhance screen magnification and functionality on your Windows 10 system.