VxRail E660F

Отсутствие серийного номера PSNT на узлах, поставляемых с VxRail версии 7.0.450 или 8.0.100, вызывает проблемы с созданием кластера VxRail или операциями расширения узлов.

В этом документе перечисляются минимальные, рекомендуемые и последние версии кода для продуктов Dell Technologies Enterprise и Datacenter Infrastructure. Мы тщательно оцениваем и контролируем данные по развертыванию кода, чтобы обеспечивать соответствие выпускаемой продукции нашим строгим требованиям и предоставлять нашим заказчикам надежные продукты и решения.

Event VXR500UEFI0440 is reported when the client cannot access iDRAC due to reaching the maximum number of login attempts.

Event VXR500SUP0556 is reported when some of the components fail to start or complete the firmware update operation.

Support iDRAC events monitor: STOR704

Support iDRAC events monitor: SEKM098

Support iDRAC events monitor: CPU7114

Event code: VXR500AMP0319 This event code indicates "Chassis power level current is less than the lower critical threshold."

Event VXR508CTL139 indicates: The storage controller arg1 is unable to communicate to the BMC because of arg2 Error. iDRAC management for this device is unavailable.

Event VXR508TMP0153 indicates: Communication with one or more temperature sensors is not available and fan speeds may have increased to protect the system.

Event VXR500PSU8531 indicates: The Power Supply Unit <slotnum> reported input overcurrent fault and has been turned off.

Event VXR500PSU8530 indicates: The Power Supply Unit <slotnum> reported an input undervoltage fault and has been turned off.

Event VXR500PSU8529 indicates: The temperature of Power Supply Unit <slotnum> exceeded upper temperature threshold and has been turned off.

В веб-клиенте vSphere отсутствует подключаемый модуль vSAN

Эта диагностика системы анализирует файл /etc/hosts на наличие известных проблем, которые могут привести к сбою обновления, и при необходимости устраняет их.

The Microsoft SQL Trace Flag 1800 is a setting that enables SQL Server 4k I/O alignment for the SQL transaction log volume. In this article, we explore the cause of transaction log misaligned I/O and the benefits of using the trace flag 1800. This applies to Dell and other vendor storage solutions with virtualized SQL solutions.

Это последняя версия таблицы поддержки Dell OpenManage Enterprise 4.3.x.

Event VXR508PSU0917 indicates: The server is unable to communicate with Power Supply <number>.

Event VXR500MEM7199 indicates: An unknown critical diagnostic event occurred in the memory device at <location>. (Extended ID: <code>).

Event VXR500MEM7110 A critical diagnostic event occurred in the memory device at <location>. Update device firmware. (Extended ID: <code>).

Event VXR500MEM7108 indicates: A critical diagnostic event occurred in the memory device at <location>. Sanitize the device. (Extended ID: <code>)

Event VXR500MEM7107 indicates: A critical diagnostic event occurred in the memory device at <location>. Retry operation. (Extended ID: <code>).

Event VXR500MEM7104 indicates: A critical diagnostic event occurred in the memory device at <location>. Perform a cold reboot. (Extended ID: <code>)

В этой статье рассматривается сбой процесса управления жизненным циклом VxRail (LCM) при модернизации с версии 7.0.520 или 7.0.521. В нем предлагается решение проблемы «vSAN disk object object timeout».

Если установлен твердотельный накопитель PS1010 или PS1030 NVMe, во время производства или сбора журналов операционной системы (ОС) может возникнуть PSOD.

Event VXR500MEM7102 indicates: A critical diagnostic event occurred in the memory device at <location>. Reseat the device. (Extended ID: <code>).

Event VXR500MEM7101 indicates: A critical diagnostic event occurred in the memory device at <location>. Check the device and system configuration. (Extended ID: <code>)

Event VXR508MEM6199 indicates: An unknown diagnostic warning event occurred in the memory device at <location>. (Extended ID: <code>)

Event VXR508MEM6110 indicates: A diagnostic warning event occurred in the memory device at <location>. Update device firmware. (Extended ID: <code>).

Event VXR508MEM6107 indicates: A diagnostic warning event occurred in the memory device at <location>. Retry operation. (Extended ID: <code>)