PowerEdge R940xa

У цій статті наведено посилання для завантаження колекції ліцензій Dell trial 30 та 90 днів, включаючи iDRAC Enterprise, iDRAC Datacenter, Chassis Management Consoles (CMC) Enterprise, OpenManage Enterprise та OpenManage Integration.

У наступній статті наведено інформацію про параметри мов, доступні в BIOS, контролері життєвого циклу та інтегрованому контролері доступу Dell (iDRAC) у системах Dell PowerEdge, а також про те, як його змінити.

The article explains what is a foreign configuration is and how to troubleshoot it.

The article is a solution to fixing the issue of the system asking for eh product key after making a hardware change.

This article explains how to generate a troubleshooting log for PowerVault TL2000/TL4000 using the graphical interface for recent firmware or Telnet for older versions.

This article provides information about how to set up your network so the CMC and the iDRAC can dynamically update the DNS.

Dell Enterprise solid state drives are developed to precisely match the Dell Enterprise systems and to provide an optimal production environment.

Process Monitor is an information collection tool designed to gather registry and file activity within Microsoft Operating System environments. The information below explains how to setup Process Monitor to run automatically at specific times aiding in troubleshooting application and operating system failure events. How to set up and automate the Microsoft Process Monitor for Windows to simplify application and system troubleshooting. Learn Process Monitor capabilities, setup steps, and how to manage log files for streamlined issue resolution.

The Dell iDRAC9 IPv6 Link Local and StateLess Address Auto Configuration (SLAAC) Addresses change after upgrading to iDRAC9 firmware 5.10.00.00 or later releases.

This article is intended to clarify when iDRAC9 firmware 5.00.20.10 should be installed on Dell EMC PowerEdge servers.

OpenManage Server Administrator 10.1.0 for RHEL7, RHEL8, and SLES15 requires the 10.1.0.1 patch for specific 15G, 14G Intel, and AMD PowerEdge platforms that now ship with or have parts replaced with revised PERC 10, PERC 11, and Host Bus Adapter (HBA) controllers due to supply chain issues. Since these revised controllers only support specific server models, the OMSA 10.1.0.1 patch cannot be posted to the Dell Linux repository and must be installed separately.

The install stops at the Windows Splash screen on Server startup when installing a Windows Update package.

This article provides the steps necessary to transfer Flexible Single Mast Operation (FSMO) roles between domain controllers. Also, learn how to move FSMO roles, change the schema, and manage all FSMO roles efficiently to ensure a continuous Active Directory.

This article details the steps required to use WinRE to load drivers for a network card and connect to a network share to backup files from an unbootable server.

Як захопити трасування Storport, щоб допомогти усунути проблеми з затримкою зберігання.

This is a brief demonstration of how to use logman, relog, and typerf to collect performance logs useful in troubleshooting slow performance conditions.

Dell customers may report an unrecoverable hardware error on POST with configurations including a certain mix of Mellanox firmware, BIOS, and iDRAC versions. While the issue was reported on VMware with CX-5 cards, other Dell/Mellanox hardware may be affected.

Steps on how to clear NVRAM using Lifecycle Controller remotely using the retire and repurpose process.

Does running a CPU at high temperatures for extended periods of time impact its quality and lifespan?

This article provides information about how to boot past the Driver Health Manager Screen.

This article provides information about Dell Boot Optimized Storage Solution (BOSS) PCIe cards. It also provides instructions for installing Windows, Red Hat, SuSE, Ubuntu, and related Linux distributions onto these cards.

This article provides information about how to troubleshoot PCIe devices that are not being detected correctly.

OpenManage Enterprise: Error in Devices/Groups tab while creating repository in Update Manager Plugin 1.2

У цій статті наведено оновлені рекомендації щодо керування подіями порогу помилки, які можна виправити (MEM0802 або MEM5104) на RDIMM або LRDIMM, встановлених на серверах PowerEdge 14G і 15G на базі Intel і 15G PowerEdge на базі AMD.

Windows 2022 has not removed any features from Hyper-V or networking. However, they have forced LBFO Virtual switches to the Command line for creation. While nothing has changed, the Vmswitch fails to create, as normal. The Error is Failed while adding Virtual Ethernet Switch Connections. Attaching a virtual switch to an LBFO team is Deprecated. The only way around this error is to add "-AllowNetLbfoTeams $true" this will require PowerShell and may be a call generator.

This article gives the steps for resetting the 120-day Remote Desktop Services licensing grace period in Windows Server.

How to repair No Boot Missing or Corrupt BCD on Windows OS.

The FLtmc Checker tool looks up filter drivers.

Use the BOILER Tool to Analyze CBS/DISM logs to provide suggestions on a resolution.

Dell OpenManage Server Administrator 10.1.0 and later no longer responds to direct WMI or SNMP queries from six DELL_CMxxxx classes of various system inventory items. This is due to a Dell engineering's decision to remove the underlying Inventory Collector (IC) module for both security and installation package size constraints.