PowerEdge R330

本文介绍如何创建和导入 iDRAC 证书。

本文提供了对 PowerEdge 服务器的机箱防盗和机箱打开消息进行故障处理的步骤。

PowerEdge 17th Generation Servers with Delta Power Supplies may not show correctly in iDRAC UI and SEL logging after AC cycle.

本文提供有关 Dell System Update （DSU） 的指导。

文章介绍了在配置有PERC H755N/H965i 阵列卡的PowerEdge服务器上，NVMe 磁盘在操作系统中显示为 SCSI 磁盘这一情况的原因和解决方案。

具有通用设计组件的 Dell PowerEdge 服务器分为几代，例如 PowerEdge 第 17 代服务器、第 16 代、第 15 代或第 14 代。本文提供有关 PowerEdge 服务器型号命名惯例的一般指导，以确定代系和通用组件。本文还按型号列出了所有 PowerEdge 服务器，包括类型、CPU、代系和远程管理组件。

This article explains what disk errors PDR1001 and PDR3 mean on Dell PowerEdge servers and the best practices to resolve these issues. By understanding these alerts and acting promptly, you can maintain storage health, prevent downtime, and protect critical data.

This article shows how to add additional disks to a virtual disk or reconfigure a virtual disk.

How to Identify the physical slot number in iDRAC based off the device name in vSphere/VSAN.

This article provides information about exporting the Tech Support Report (TSR) / SupportAssist Collection, including the Operating System, Application Data, and the RAID controller log. This is done using the integrated Dell Remote Access Controller (iDRAC) command-line interface (CLI) of Dell PowerEdge servers generations 12, 13, and 14.

This document answers questions about SupportAssist Enterprise.

本文提供了三种方法来确认 SSD 部件标识 （PPID）

在达到 70000 个开机小时数 （POH） 时，驱动器将在第一次电源重启后因日志已满状态而断言。在此状态下，驱动器将不会处理读取或写入命令。

背板固件更新作业失败并显示SUP0517错误。

PowerEdge 14G, 15G, 16G, and 17G servers skip Preboot eXecution Environment (PXE) boot when an "Unavailable" entry is last in the boot order.

Fans reporting FAN0000/FAN0001 errors (RPM below warning or critical) should be removed and swapped to another connector; if the error follows the fan, replace it.

Dell PowerEdge Toshiba MG08 and MG09 hard drives may encounter uninterruptible Background Media Scanning (BMS), causing I/O errors, or timeouts.

Encountering PR8 errors in the LifeCycle (LC) log when using a BlueField-3 (BF3) Data Processing Units (DPU) card (DPN: HFWRM).

This article provides information about the LIC008 error seen when importing the IDRAC License.

This article provides information about how to verify if a Network Interface Card (NIC) is compatible with a PowerEdge Server.

This article provides information about CPU Machine Check errors and common causes and proper handling when errors are seen.

Dell Samsung PM893 SSDs with Firmware HJ55 or Earlier Experience Premature SMART Failures

R7725, R6725, R7715, and R6715 the number of CPU Cores is not recognized correctly.

PowerEdge: Dell service support for end of industry production of 2.5" 15k RPM SAS hard drives

第 15 代 PowerEdge 服务器在发生事件后无响应或停止PST0210响应。

PowerEdge servers crash with PCIe fatal errors while updating Kioxia CM6 NVMe drive firmware.

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

在 ESXi 8.0 U3 安装期间观察到系统停止响应或紫屏死机 （PSOD），

本文可帮助您在戴尔支持站点上找到并下载较旧版本的适用于 ESXI 的戴尔自定义 ISO。

The Dell SS540 SAS solid state drive is reported as not correctly functioning.