PowerEdge R7415

Dell Technologies 指导用于针对服务器、存储和网络产品降低风险和解决边信道分析漏洞（也称为 Meltdown 和 Spectre）。 有关受影响平台的特定信息以及应用更新的后续步骤，请参阅本指南。

Dell EMC指导用于针对服务器、存储和网络产品降低风险和解决边通道分析漏洞（又称为Speculative Store Bypass和Rogue System Register Read）。有关受影响平台上的特定信息以及应用更新的后续步骤，请参阅本指南。

使用 Windows 操作系统中的 Open Manage Server Administrator （OMSA） 命令行，自动执行 PowerEdge RAID 控制器 （PERC） 上的存储一致性检查。

Dell PM1735a NVMe (Non-Volatile Memory Express) drive failing in PowerEdge servers

了解如何通过配置 iDRAC、启动 Lifecycle Controller、更新固件和安装支持的操作系统来设置 Dell PowerEdge 服务器。

本文档重点介绍 Dell Technologies PowerEdge 产品的最低代码版本、建议代码版本和最新版本。我们会仔细评估和监控代码部署数据，以确保产品版本符合我们严格的期望，为客户提供可靠的产品和解决方案。

To replace a CMOS battery, remove the air shroud, disconnect and remove any expansion cards, locate the battery socket, and carefully pry out the CMOS battery. After installing a new CMOS battery, you must reinstall the expansion cards, install the air shroud, and restore the BIOS settings, ensuring the battery is operating properly and the correct data and time are set in the System Setup.

本文介绍在本地和远程重置 Integrated Dell Remote Access Controller (iDRAC) 的多种方法，包括重置、重置为默认值和重置为客户配置。

Dell's firmware catalogs for customized versions of Dell's VMware ESXi 8.x releases. When the Dell customized ESXi versions are used along with corresponding firmware catalogs, the end to end required state is achieved.

The PowerEdge embedded LifeCycle Controller provides a simplified method for installation of supported Windows Server and Linux server operating systems with the OS Deployment feature. This article explains how to use the iDRAC LifeCycle Controller to install a supported operating system on most Dell PowerEdge servers. Step-by-step instructions and OS installation videos for Windows Server, Ubuntu Server LTS, SUSE Linux Enterprise Server, or Red Hat Enterprise Linux installation with LifeCycle Controller

The following article provides information about the Languages Option available in the BIOS, Lifecycle Controller, and the Integrated Dell Access Controller (iDRAC) on Dell PowerEdge Systems and How to change it.

When running the nvidia-smi command, you may encounter a driver error stating that "nvidia-smi has failed because it could not communicate with the NVIDIA driver.

This article explains what disk errors PDR1001 and PDR3 mean on Dell PowerEdge servers and the best practices to resolve these issues. By understanding these alerts and acting promptly, you can maintain storage health, prevent downtime, and protect critical data.

This article provides instructions on how to assign a hard drive as a global hot-spare on a PowerEdge RAID Controller (PERC)

This is a brief demonstration of how to use logman, relog, and typerf to collect performance logs useful in troubleshooting slow performance conditions.

Dell TPM 1.2 and 2.0 solutions are one of the few TPM solutions that are enhanced by full certification.

This article provides different methods to get the iDRAC IP address of your PowerEdge servers directly from the VMware ESXi host. It is useful when you do not have physical access to the server.

This article provides a high-level explanation for updating the BIOS and iDRAC9 firmware versions for 14th generation PowerEdge servers.

This article is a step-by-step guide on how to replace a hard drive.

This article provides guidance for Dell PowerEdge servers requiring remediation for the Microsoft Secure Boot certificate expiration (June 2026).

The iDRAC virtual console can be launched using a web interface or URL. Using the iDRAC virtual console viewer is also explained.

The Dell Server Update Utility (SUU) allows updating firmware and Operating System drivers on Dell PowerEdge servers. This article summarizes the steps to download the tool and to use it to update components on a Windows Server target server.

本文提供了三种方法来确认 SSD 部件标识 （PPID）

不确定更新 PowerEdge 系统中特定组件固件的过程？在此特定文章中了解应该怎么做。

本文讨论如何使用 PowerShell 管理 Windows Server Update Services （WSUS） 角色。详细介绍了用于添加 WSUS 角色和执行各种管理任务的 PowerShell 命令。

本文提供有关如何在系统设置 （F2） 菜单中导入外部配置 RAID 阵列的信息。

本文介绍如何使用和设置 Integrated Dell Remote Access Controller （iDRAC） 6、7、8 或 9 的虚拟介质功能。

本文介绍如何在系统设置程序中查看和清除系统事件日志 （SEL）。

本文介绍如何将附加磁盘添加到虚拟磁盘或重新配置虚拟磁盘。

本操作方法解释了这些命令，并显示了相同的输出结果，以便使用命令控制台检索您的服务编号。 它显示为系统序列号。