Removal
Front Bezel
Identify the front bezel highlighted in blue
Unlock the front bezel by using the key.
Press the release button, and pull the left end of the front bezel.
Unhook the right end, and remove the front bezel.
Drive Carrier
Select the drive carrier you want to replace
Press the release button to open the release handle.
Holding the handle, slide the drive carrier out of the drive slot.
Drive - 2.5 inch
Identify the drive highlighted in blue.
Remove the screws from the slide rails on the drive carrier.
Lift the drive out of the drive carrier.
Install
Drive - 2.5 inch
Identify the drive highlighted in blue.
Insert the drive with the drive connector facing the rear of the carrier.
Install the screws to secure the drive to the drive carrier.
Drive Carrier
Confirm the drive carrier you want to replace
Press the release button on the front of the drive carrier to open the release handle.
Insert the drive carrier into the slot and slide until it connects with the backplane.
Close the drive carrier release handle to lock the drive in place.
Front Bezel
Identify the front bezel location highlighted in blue
Align and insert the tabs on the bezel into the slots on the system.
Press the bezel until the release button clicks in place.
Lock the front bezel by using the key.