Removal
Stand
Identify the stand highlighted in blue.
Press and hold down on the tab that secures the stand to the display assembly base.
Lift the stand off the display assembly base.
Back Cover
Identify the back cover highlighted in blue.
Place your palm in the middle of the back cover, and then pry the back cover from the display assembly base starting from the top corners.
Slide and lift the back cover off the display assembly base.
I/O Cover
Identify the I/O cover highlighted in blue.
Remove the screws that secure the I/O cover to the display assembly base.
Using a pry tool, pry open the corners and bottom of the I/O cover.
Lift the I/O cover off the display assembly base.
System Board Shield
Identify the system board shield highlighted in blue.
Remove the screws that secure the system board shield to the display assembly base.
Lift the system board shield off the display assembly base.
Power Button Board
Identify the power button board highlighted in blue.
Remove the screws that secure the left stand hinge to the display assembly base.
Lift the left display hinge from the palm rest.
Remove the screw that secures the power button board to the display assembly base.
Peel the tape that secures the power button board cable to the power button board.
Lift the power button board from the tabs on the display assembly base.
Lift the latch and disconnect the power button board cable from the power button board.
Lift the power button board off the display assembly base.
Install
Power Button Board
Identify the power button board location highlighted in blue.
Connect the power button board cable on the power button board. Close the latch to secure.
Use the tabs to line up the power button board, then slide it into the slot on the display assembly base.
Install the screw that secures the power button board to the display assembly base.
Adhere the tape that secures the power button cable to the power button board.
Place the left display hinge on the palm rest.
Install the screws that secure the left stand hinge to the display assembly base.
System Board Shield
Identify the system board shield location highlighted in blue.
Place the system board shield on the display assembly base and align with screw holes.
Install the screws that secure the system board shield to the display assembly base.
I/O Cover
Identify the I/O cover location highlighted in blue.
Place the I/O cover on the display assembly base and align with screw holes.
Install the screws that secure the I/O cover to the display assembly base.
Back Cover
Identify the back cover location highlighted in blue.
Align the back cover to the display assembly base.
Press along the sides to snap the back cover into place on the display assembly base.
Stand
Identify the stand location highlighted in blue.
Align the stand to the slot with the display assembly base.
Insert the stand into place into the slot on the display assembly base.