Removal
Left Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Front Cover
Identify the front cover highlighted in blue.
Pry and release the tabs that secure the front cover to the chassis.
Rotate the front cover outward and lift it from the chassis.
Drive Bay Assembly
Identify the drive bay assembly highlighted in blue.
Disconnect the data and power cables from the hard drive.
Lift the drive bay assembly at an angle to release the tabs from the chassis.
Slide and remove the drive bay assembly from the chassis.
Power Button
Identify the power button highlighted in blue.
Disconnect the power button cable from the system board.
Press and hold the release tabs on the power button to release it from the slot in the chassis.
Remove the power button with its cable from the front of the chassis.
Install
Power Button
Identify the power button location highlighted in blue.
Thread the power button cable through the chassis slot, then press the power button until it clicks into place.
Connect the power button cable to the system board.
Drive Bay Assembly
Identify the drive bay assembly location highlighted in blue.
Slide and secure one side of the drive bay assembly to the chassis.
Press down the other end of the drive bay assembly, securing the tabs into the slots on the chassis.
Connect the data and power cables to the hard drive.
Front Cover
Identify the front cover location highlighted in blue.
Align and insert the front cover tabs into the slots on the right side of the chassis.
Rotate the front cover toward the chassis and press it into place.
Left Side Cover
Identify the side cover location highlighted in blue.
Align and slide the left side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.