Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumbscrews that secure the side cover to the system.
Slide and lift the side cover away from the system.
Fan Duct
Identify the fan duct highlighted in blue.
Press the retention tabs on both sides of the fan duct to release it.
Remove the fan duct off the chassis.
Power Supply Unit
Identify the power supply unit highlighted in blue.
Disconnect the power supply cables from the system board.
Unroute the power supply cables from the routing guides on the chassis.
Remove the screws that secure the power supply unit to the chassis.
Slide and lift the power supply unit off the chassis.
Install
Power Supply Unit
Identify the power supply unit location highlighted in blue.
Place the power supply unit on the chassis and slide it until the securing tab snaps into position.
Install the screws to secure the power supply unit on the chassis.
Route the power supply cables through their routing guides on the chassis.
Connect the power supply cables to their connectors on the system board.
Fan Duct
Identify the fan duct location highlighted in blue.
Place the fan duct into the slots on the chassis.
Push the fan duct toward the back panel of the chassis until it clicks into place.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots and place the side cover on the system.
Tighten the thumbscrews that secure the side cover to the system.