Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the cover to the system.
Slide the cover toward the back and lift to remove from the system
Front Bezel
Identify the front bezel highlighted in blue.
Lift the tabs to release the bezel from the system.
Slightly lift the front of the system to release the bezel from system.
Front Panel
Identify the front panel highlighted in blue.
Lift the front panel up to open.
Heatsink
Identify the heatsink highlighted in blue.
Disconnect the fan cable from the connector on the system board.
Loosen the captive screws that secure the heatsink to the system board
Lift the heatsink away from the system.
Use the alcohol pad to clean the heatsink (as shown in the video).
Processor
Identify the processor highlighted in blue.
Push down and outwards to release the lever. Lift the lever upward and lift up the processor shield.
Hold the processor firmly by the sides and lift the processor straight upwards from its socket.
Install
Processor
Identify the processor location highlighted in blue.
Hold the processor edges and lower into its socket. Align the triangle on the processor with the socket. Do not use force as the pins can be easily damaged.
Close the processor shield by rotating it inwards. Lower the lever and push it under the tab to lock.
Heatsink
Identify the heatsink location highlighted in blue
Apply paste or pad included with the heatsink. Apply in a spiral pattern.
Align the heatsink to the screw holes and slowly lower the heatsink assembly on the processor.
Tighten the captive screws that secure the heatsink.
Connect the fan cable to the connector on the system board.
Front Panel
Identify the front panel highlighted in blue.
Close the front panel door. Push down until it clicks into place.
Front Bezel
Identify the front bezel location highlighted in blue
Align the tab holders on the system and push the bezel until the tabs click into place.
Base Cover
Identify the base cover location highlighted in blue.
Place the cover on the system and slide the cover until it clicks into place.
Tighten the captive screws to secure the cover to the system.