Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the base cover to the computer.
Pry open the base cover starting from the bottom right corner of the base cover.
Lift the base cover starting from the bottom edge and push it towards the rear to remove it from the system.
CAMM Module
Identify the compression attached memory module highlighted in blue.
Remove the screws that secure the memory bracket on the CAMM module.
Lift the memory bracket off the CAMM module.
Remove the screws that secure the CAMM module to the system board.
Remove the CAMM module from the system board.
Install
CAMM Module
Identify the compression attached memory module location highlighted in blue.
Place the CAMM module to the system board.
Install the screws to secure the CAMM module to the system board.
Place the memory bracket on the CAMM module.
Install the screws to secure the CAMM module.
Base Cover
Identify the base cover location highlighted in blue.
Install the base cover into its slot until it clicks into place.
Tighten the captive screws to secure the base cover to the computer.