CAUTION: Many
repairs may only be done by a certified service technician. You should
only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by
Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the
SSD cage to replace a faulty SSD cage or service other components
inside the system.
Follow the safety guidelines listed in the Safety
instructions section.
Follow the procedure listed in the Before working
inside your system section.
Keep the Phillips #1 screwdriver
ready.
Steps
Align the slots on the sides of the SSD cage
with the guide pins on the chassis.
Push the SSD cage into the chassis until the
screw holes on the chassis are aligned with the holes on the SSD cage.
Slide the SSD cage into the chassis till the
IDSDM card connector engages completely with the connector on the
system board.
Secure the SSD cage to the chassis with the
screws.
Next steps
Install the SSD backplane.
Install the SSDs.
Follow the procedure listed in the After working inside
your system section.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\