CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized
in your product documentation, or as directed by the online or telephone
service and support team. Damage due to servicing that is not authorized
by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
Follow the safety guidelines listed in the Safety
instructions section.
Follow the procedure listed in the Before working
inside your system section.
Remove the cooling shroud.
NOTE: The memory modules are hot to touch for some time after the system
has been powered down. Allow the memory modules to cool before handling
them. Handle the memory modules by the card edges and avoid touching
the components or metallic contacts on the memory module.
CAUTION: To ensure
proper system cooling, memory module blanks must be installed in any
memory socket that is not occupied. Remove memory module blanks only
if you intend to install memory modules in those sockets.
Steps
Locate the appropriate memory module socket.
CAUTION: Handle each memory module only by the card edges, ensuring not to
touch the middle of the memory module or metallic contacts.
To release the memory module from the socket,
simultaneously press the ejectors on both ends of the memory module
socket.
Lift and remove the memory module from the
system.
Next steps
Install the memory module.
NOTE: If you are removing
the memory module permanently, install a memory module blank.
Install the cooling shroud.
Follow the procedure listed in the After working
inside your system section.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\