The expansion card
slots are warm-plug. A PCIe card has to be prepared for removal from
a system that is turned on, using the CMC. The PCIe slot indicators
show that a PCIe card is ready for removal.Figure 1. PCIe slot indicators
PCIe slot indicators for low-profile expansion cards
PCIe slot indicators for full-height expansion cards
The PCIe slot indicators provide the following
information:
Indicator
Description
Slot power indicator
Steady Green
The slot is receiving power.
Blinking Green
Warm-plug operation is in progress and insertion
or removal of the adapter is not allowed.
Off
Power supply to the slot is off, and the expansion
card can be removed.
Slot attention indicator
Steady Amber
The adapter or slot is in a fault condition.
Blinking Amber
The indicator blinks for 15 seconds after the slot
identify command.
Off
The slot is operating normally, or no expansion card
is installed in the slot.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\
