Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge VRTX Enclosure Owner's Manual

Installing the midplane

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Steps

  1. Angle the side of the midplane with the planar connectors, and slide the midplane into the chassis.
    The planar connectors align with the chassis slots.
  2. Rotate the other side of the midplane until the midplane is aligned with the two securing pins on the chassis.
  3. Press the midplane to the chassis, until it engages with the securing pins, and is firmly seated.
  4. Replace the following:
    1. blower module bay
    2. power pass-through board
    3. system board
    4. power distribution board
    5. PCIe cage
    6. hard drive backplane
    7. backplane expander board
    8. cooling fan assembly
    9. cooling shroud
  5. Close the system.
  6. If applicable, place the system upright on a flat, stable surface and rotate the system feet outward.
  7. Replace the following:
    1. blower modules
    2. I/O module
    3. power supply units
    4. hard drives
    5. server modules
  8. Reconnect the enclosure to its electrical outlet and turn the enclosure on, including any attached peripherals.
  9. Turn on the server modules using the operating system commands or the CMC.
  10. If applicable, install the front bezel.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\