Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show users

Allows you to view information on all users logged in to the switch.

Syntax

show users [all]

Parameters

all	(OPTIONAL) Enter the keyword `all` to view all terminal lines in the switch.

Command Modes

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.5(0.0)	Introduced the support for roles on the MXL 10/40GbE Switch.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show user command shown in the following example.

Field	Description
(untitled)	Indicates with an asterisk (*) which terminal line you are using.
Line	Displays the terminal lines currently in use.
User	Displays the user name of all users logged in.
Host(s)	Displays the terminal line status.
Location	Displays the IP address of the user.

Example

Dell# show users
                                             Authorization Mode:  role or privilege
                                             Line       User   Role       Priv Host(s) Location
                                             * 0  console 0      unassigned  1   idle
                                             2  vty 0   admin  unassigned  1   idle    10.16.127.35
                                             3  vty 1   ad     unassigned  15  idle    10.16.127.145
                                             4  vty 2   ad1    sysadmin    1   idle    10.16.127.141
                                             5  vty 3   ad1    sysadmin    1   idle    10.16.127.145
                                             6  vty 4   admin  unassigned  1   idle    10.16.127.141
                                             7  vty 5   ad     unassigned  15  idle    10.16.127.141
                                             Dell#

Related Commands

username — enables a user.