Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

spanning-tree msti

Configure multiple spanning tree instance cost and priority for an interface.

Syntax spanning-tree msti instance {cost cost | priority priority}
Parameters
msti instance Enter the keyword msti and the MST instance number. The range is from zero (0) to 63.
cost cost (OPTIONAL) Enter the keyword cost then the port cost value. The range is from 1 to 200000. The defaults are:
  • 10-Gigabit Ethernet interface = 2000
  • Port Channel interface with one 10 Gigabit Ethernet = 2000
  • Port Channel with two 10 Gigabit Ethernet = 1800
  • Port Channel with two 100 Mbps Ethernet = 180000
priority priority Enter keyword priority then a value in increments of 16 as the priority. The range is from 0 to 240. The default is 128.
Defaults
  • cost = depends on the interface type
  • priority = 128
Command Modes INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\