Dell PowerEdge C6320p Owner's Manual

PDF

PSU specifications

Dell PowerEdge C6300 enclosure supports up to two AC or HVDC power supply units (PSUs). Dell PowerEdge C6320p does not support a mixed installation of 1400 W and 1600 W PSUs. The 1400 W and 1600 W PSUs are hot swappable and support hot swap in any condition if the system has the power throttling feature enabled.

Table 1. PSU specifications For 1400 W AC PSUs, the maximum heat dissipation is 5220.763 BTU/hr, voltage is 200-240 V AC, and maximum input current is 9 A. Initial inrush current cannot exceed 55 A and secondary inrush current cannot exceed 25 A. For 1600 W AC and voltage of 100-120 V AC, heat dissipation is 5966.586 BTU/hr and maximum input current is 12 A. Initial inrush current and secondary inrush current cannot exceed 35 A. For 1600 W AC and voltage of 200-240 V AC, heat dissipation is 5966.586 BTU/hr and maximum input current is 10 A. For 1400 W HVDC, voltage is 240 V DC, maximum input current is 9 A, and maximum heat dissipation is 5220.763 BTU/hr. Initial inrush current cannot exceed 55 A and Secondary inrush current cannot exceed 25 A. For 1600 W HVDC, voltage is 240 V DC, maximum input current is 9 A, and maximum heat dissipation is 5966.586 BTU/hr. Initial inrush current cannot exceed 55 A and Secondary inrush current cannot exceed 25 A.
PSU	Heat dissipation (maximum)	Frequency	Voltage	Maximum input current	Maximum inrush current (peak)
1400 W AC	5220.763 BTU/hr	50/60 Hz	200-240 V AC	9 A	Initial inrush current cannot exceed 55 A (peak). Secondary inrush current cannot exceed 25 A (peak).
1400 W HVDC (China only)	5220.763 BTU/hr	–	240 V DC	9 A
1600 W AC	5966.586 BTU/hr	50/60 Hz	100-120 V AC 200-240 V AC	12 A 10 A	Initial inrush current and secondary inrush current cannot exceed 35 A (peak).
1600 W HVDC	5966.586 BTU/hr	–	240 V DC	10 A