Dell PowerEdge C6320p Owner's Manual

PDF

Supported memory module configuration

For the sequence of the six memory-module sockets, the system requires at least one memory module installed in DIMM slot A1 to boot up. When you insert the memory modules, always start with CH0_A1. The optimized memory module installation sequence is A1, (A1, D1), (B1, E1), (C1, F1).

This image shows DIMM slot locations. — Figure 1. DIMM slot locations

Table 1. Memory module populationThis table describes about memory module population.
Memory modules	CH0	CH1	CH2	CH3	CH4	CH5
Memory modules	A1	B1	C1	D1	E1	F1
1	√	‒	‒	‒	‒	‒
2	√	‒	‒	√	‒	‒
4	√	√	‒	√	√	‒
6	√	√	√	√	√	√

NOTE: The Poweredge C6320p does not support:

RAS modes (Advanced ECC, Sparing, Mirroring, and Fault Resilient configurations).
mixed configurations. All populated DIMMs must be identical.
three and five DIMMs configurations.

NOTE: