Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge C6320p Owner's Manual

PDF

Troubleshooting a micro SD card

Prerequisites

NOTE: Certain micro SD cards have a physical write-protect power on the card. If the write-protect switch is turned on, the micro SD card is not writable.
NOTE: IDSDM and vFlash slots are not hot-pluggable.

Steps

  1. Enter System Setup, and ensure that the Internal SD Card Port is enabled.
  2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
  3. Remove the sled from the enclosure.
    NOTE: When an SD card failure occurs, the internal dual SD module controller notifies the system. On the next restart, the system displayed a message indicating the failure.
  4. Replace the failed micro SD card with a new micro SD card.
  5. Install the sled into the enclosure.
  6. Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.
  7. Enter System Setup, and ensure that the Internal SD Card Port mode is enabled.
  8. Check if the micro SD card is functioning properly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\