- Notes, cautions, and warnings
- About your system
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Navigation keys
- System Setup
- Entering System Setup
- System Setup details
- System BIOS Settings details
- System Information details
- Memory Settings details
- Processor Settings details
- SATA Settings details
- Boot Settings details
- Network Settings screen details
- Integrated Devices details
- Serial Communication details
- System Profile Settings details
- System Security Settings details
- Miscellaneous Settings details
- About Boot Manager
- About Dell Lifecycle Controller
- Changing the boot order
- Choosing the system boot mode
- Creating a system and setup password
- Using your system password to secure your system
- Deleting or changing system password and setup password
- Operating with a setup password enabled
- Embedded systems management
- iDRAC Settings utility
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Front bezel (optional)
- System cover
- Inside the system
- Intrusion switch
- Cooling shroud
- System memory
- Hard drives
- Supported hard drive configurations
- Removing a 2.5-inch hard drive blank
- Installing a 2.5-inch hard drive blank
- Removing a 3.5-inch hard drive blank
- Installing a 3.5-inch hard drive blank
- Removing a 3.5-inch cabled hard drive carrier
- Installing a 3.5-inch cabled hard drive carrier
- Removing a cabled hard drive from a hard drive carrier
- Installing a cabled hard drive into a hard drive carrier
- Removing a hot swappable hard drive carrier
- Installing a hot swappable hard drive carrier
- Removing the optional 1.8-inch solid state drives
- Installing the optional 1.8-inch solid state drives
- Removing a 2.5-inch hard drive from a 3.5-inch hard drive adapter
- Installing a 2.5-inch hot swappable hard drive into a 3.5-inch hard drive adapter
- Removing a 3.5-inch hard drive adapter from a 3.5-inch hot swappable hard drive carrier
- Installing a 3.5-inch hard drive adapter into the 3.5-inch hot swappable hard drive carrier
- Removing a hot swappable hard drive from a hard drive carrier
- Installing a hot swappable hard drive into a hot swappable hard drive carrier
- Optical drive (optional)
- Cooling fans
- Internal USB memory key (optional)
- Expansion cards and expansion card riser
- SD vFlash card (optional)
- iDRAC port card (optional)
- Internal dual SD module (optional)
- Heat sink and processor
- Power supply units
- System battery
- Hard drive backplane
- Control panel assembly
- Power interposer board
- Trusted Platform Module
- System board
- Using system diagnostics
- Jumpers and connectors
- Troubleshooting your system
- Troubleshooting system startup failure
- Troubleshooting external connections
- Troubleshooting the video subsystem
- Troubleshooting a USB device
- Troubleshooting iDRAC Direct (USB XML configuration)
- Troubleshooting iDRAC Direct (Laptop connection)
- Troubleshooting a serial I/O device
- Troubleshooting a NIC
- Troubleshooting a wet system
- Troubleshooting a damaged system
- Troubleshooting the system battery
- Troubleshooting power supply units
- Troubleshooting cooling problems
- Troubleshooting cooling fans
- Troubleshooting system memory
- Troubleshooting an internal USB key
- Troubleshooting an SD card
- Troubleshooting an optical drive
- Troubleshooting a tape backup unit
- Troubleshooting a hard drive or SSD
- Troubleshooting a storage controller
- Troubleshooting expansion cards
- Troubleshooting processors
- Getting help
Dell PowerEdge R330 Owner's Manual
SATA Settings details
About this task
- Option
- Description
- Embedded SATA
- Enables the embedded SATA option to be set to Off, , AHCI, or RAID modes. This option is set to AHCI by default.
- Security Freeze Lock
- Sends Security Freeze Lock command to the Embedded SATA drives during POST. This option is applicable only for AHCI mode.
- Write Cache
- Enables or disables the command for Embedded SATA drives during POST.
- Port A
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port B
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port C
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port D
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port E
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port F
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"