Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Delete Host Port

Description

This command deletes an HBA host port identification. The identification is a software value that represents the physical HBA host port to the RAID controller module. By deleting the identification, the RAID controller module no longer recognizes instructions and data from the HBA host port.

Syntax

delete hostPort [
                                 hostPortName]

Parameter

Parameter

Description

hostPort

Name of the HBA host port to delete. You must put brackets ([ ]) around the name of the HBA host port.

NOTE: An HBA host port is a physical connection on a host bus adapter that resides within a host system. An HBA host port provides a host access to the virtual disks in a storage array. If the host bus adapter has only one physical connection (one host port), the terms HBA host port and host bus adapter are synonymous.

Example

-c "delete host [\"job2900\"];"