Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Disable Storage Array Feature

Description

This command disables a storage array feature. Run the show storageArray command to display a list of the feature identifiers for all enabled premium features in the storage array.

Syntax

disable storageArray (featurePack | feature=featureAttributeList)
The featureAttributeList can be one or more of these attribute values. If you enter more than one attribute value, separate the values with a space.
  • virtualDiskCopy
  • snapshot
  • asyncReplication
  • remoteReplication
  • mixedPhysicalDiskTypes
  • goldKey
  • driveSecurity
  • enterpriseSecurityKeyMgr
  • thinProvisioning
  • storagePartition[2|4|8|16|32|64|96|128|192|256|512|Max]
The form for this attribute value is a combination of the alphabetical term merged with the numerical value, for example, storagePartition256
  • physicalDiskSlotLimit[16|24|32|48|60|64|72|96|112|10|128|136|144|180|192|256| 272|300|360|384|448|480|Max]

    The form for this attribute value is a combination of the alphabetical term merged with the numerical value, for example, physicalDiskSlotLimit360

  • ssdCache
  • SSDSupport
  • highPerformanceTier
  • raid6
  • NOTE: The following attribute is for enabling the snapshot (legacy) feature only.
    • snapshot[2|4|8|16]
The form for this attribute value is a combination of the alphabetical term merged with the numerical value, for example, snapshot16
  • NOTE: The remoteReplication attribute is valid only for firmware versions before 7.84. Starting with firmware 7.84 the remoteReplication attribute is replaced by remoteReplication.
    • remoteReplication[8|16|32|64|128]

The form for this attribute value is a combination of the alphabetical term merged with the numerical value, for example, remoteReplication128

Parameters

None.

Additional Information

If you specify the remoteReplication parameter, this command disables the Remote Replication premium feature and takes away the structure of the replication repository virtual disk.

If you disable the High Performance Tier feature, all of the included features are disabled.

To use the High Performance Tier premium feature, you must configure a storage array as:
  • SHIPPED_ENABLED
  • SHIPPED_ENABLED=FALSE; KEY_ENABLED=TRUE

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"