Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Set iSCSI Initiator

Description

This command sets the attributes for an iSCSI initiator.

Syntax

set iscsiInitiator (["iscsiID"] | <"wwID">)
                                 (userLabel="newName" |
                                 host="newHostName" |
                                 chapSecret="newSecurityKey")

Parameters

Parameter	Description
`iscsiID`	The name of the iSCSI initiator for which you want to set attributes.
`userLabel`	The new name that you want to use for the iSCSI initiator.
`host`	The name of the new host to which the HBA host port is connected. Enclose the host name in double quotation marks (" ").
`chapSecret`	The password that you want to use to authenticate a peer connection.

NOTE: Challenge Handshake Authentication Protocol (CHAP) is a protocol that authenticates the peer of a connection. CHAP is based upon the peers sharing a “secret.” A secret is a security key that is similar to a password.

NOTE: Use the chapSecret parameter only for initiators requiring mutual authentication.