Reference Guide Dell Wyse ThinOS Release 8.3.1 – INI Files

PDF

Peripheral Settings for wnos.ini Files Only

Table 3 contains the parameters used for configuring peripheral settings such as keyboard, monitor, mouse, and printer. The defaults values are underlined.

Table 1. **Peripheral Settings: wnos.ini files only**
Parameter	Description
DEVICE_SECURITY=white_list/black_list vid_pid=[vvvv,pppp] class=name/[cc,ss,pp]	When DEVICE_SECURITY=white_list is set, the security is in high level, and you need to add all the devices (on board devices including Wyse 3020 thin client with ThinOS (T10D)'s netcard, and internal hub) to the list that you want to use, and all other devices are denied when the device is plugged-in. When DEVICE_SECURITY=black_list is set, the security is mid-level, and customer can add the device which is not present in the list. About key value: all the value are hex, and vid_pid = 0xvvvvpppp, class value is =0xccsspp; where, vvvv=device vendor id pppp=device product id cc= device interface class ss=device interface subclass pp=device interface protocol Class name is abbreviation for the defined class. Valid names are listed here:{Audio, CDC_control, HID, Pysical, Image, MASS_STORAGE, Hub, CDC_Data, Smart_Card, Content_Security, Video, Personal_Healthcare, AudioVideo, Billboard, Diagnostic_Device, Wireless, Miscellaneous, Application, VendorSpecific}. For detailed information, refer: www.usb.org/developers/defined_class. The max number of devices/class table is 16. For Example: DEVICE_SECURITY=white_list class=HID class=Audio class=Video DEVICE_SECURITY=black_list vid_pid=0x0B0E2000 class=0x030101.
PrinterMap=a text file name or possibly URL.	A text file to be included to define printer mappings. Each line in the file is of format Printer Identification=Printer Driver Name. For example: HL-1240 Series=HP LaserJet.
ThinPrintEnable={no, yes} [Port=port number]	Default is yes. ThinPrintEnable — Yes/no option to enable the thinprint client. port—The TCP port of the thinprint client. The default port number value is 4000. The port number value must be less than 65535.