Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Reference Guide Dell Wyse ThinOS Release 8.3.1 – INI Files

PDF

RDP Connect Options

Table 1. RDP Connect Options
Option Description
Autoconnect={ 0 to 99}

Default is 0.

Use for automatically starting a session after sign-on, if sign-on is enabled.

The value of 0-99 is the delay in seconds before auto-starting the session.

Colors={256, 32k, 64k or high, 16m, true}

Default is high.

Session color mode. For faster display performance, use 256 colors for the session.

  • 256 is 8-bits

  • 32k is 15-bits

  • 64k or high is 16-bits

  • 16m is 24-bits

  • true is 32-bits

  • NOTE:
    • 64k is the same value as high.

    • 16m — 24-bits over RDP is only supported by Windows XP and Windows 2003 server. It is not supported by Windows Server 2008 or newer.

    • true — 32-bit remote connections are not supported by Windows XP or Windows 2003 server. It requires Windows Vista, Windows Server 2008, or newer with RDP.

Command=start command

A string of commands to be executed after logging on to the server. This entry is limited to 127 characters.

Console={ no, yes}

Default is no.

Yes/no option to login to a session in Console mode.

  • NOTE:

    If Console=yes is set behind the RDP connection, the TimeZone redirection feature will be disabled.

Description=string description

Connection description. Enclose the string description in quotation marks if there are embedded blanks or single quotes. For quotation marks, use common-practice nesting rules. Maximum of 38 characters are allowed.

Directory=working directory

A directory to be used as the working directory after logging on to the server. Maximum of 63 characters are allowed.

Disablesound={ no, yes, 2} or { 0, 1, 2}

Default is no. or Default is 0.

Specifies whether or not to disable remote sound upon connection start.

  • NOTE:

    Disablesound=2 only works in RDP sessions and indicates that the remote computer sound should be disabled at the remote computer.

Domainname={domain name,$DN}

Domain name to use in a Windows network. $DN specifies that the thin client sign-on domain name is used. Maximum of 19 characters are allowed.

Fullscreen={ no, yes}

Default is no.

Yes/no option to run the session in full screen. If Fullscreen=no then the session runs in a windowed screen.

  • NOTE:

    Fullscreen=Yes and DualHead=Yes will result in Span Mode when connecting to a Windows server 2003 or a Windows XP Pro Client.

    Fullscreen=Yes and DualHead=Yes will result in Extended mode when connecting to a Windows Server 2008 (any version) and to a Windows 8 or above desktop.

Host=[name, IP, $SYS VAR]

Host — A list of server host names or IP addresses to which the thin client will attempt to connect; the next server on the list is attempted if the previous one failed. List items must be separated by semicolons or commas.

  • NOTE:

    $UN specifies that the sign-on user name is used and should be set in a {username}.ini file. , see Table 1: System Variables. If set to Host=$UN in a {username}.ini file, the hostname will display as the sign-on user name. If set to Host=$UN in a wnos.ini file, the hostname will display as the default Start.

Icon={default, bitmap file}

Specifies an icon to appear on the thin client desktop for a connection. Use Icon=default to display a system default icon for a connection.

To use an icon other than the default icon, enter the name with extension of the bitmap file; ensure that the file is located in the FTP server wnos\bitmap directory. If Icon= is not specified and the icon is not specified by a PNAgent/PNLite server, no icon is displayed for a connection.

KeepAlive={0 to 127}

Default is 10.

Specifies the number of minutes to keep a session connected after the session is inactive. During this period, one dummy packet will be sent to the server if network traffic is lost.

LocalCopy={ no, yes}

Default is no.

Yes/no option to save the connection to the local NVRAM.

The connection description of the Description option is used as the index key into the local connection table. If a match is found, then the entry is updated. Otherwise, a new entry is created.

Maximum total of local entries is 16.
Logon_mode=prompt

Specifies one dialog box will pop up to allow a user to enter username, password, and domain before connecting to the RDP session. This can prevent the need to input credentials twice in some cases of server redirection (load balancing).

Lowband={ no, yes}

Default is no.

Yes/no option to enable optimization for low speed connections such as reducing audio quality and/or decreasing protocol-specific cache size.

Mapdisks={ no, yes}

Default is no. Yes/no option to auto-connect and map any connected USB flash drive upon connection start.

NoReducer={ no, yes}

Default is no — Enables compression.

Yes/no option to turn off compression. To turn off compression, enter yes. Used here is an option of the Connect statement. It sets the value of NoReducer only for this specified connection.

  • NOTE:

    By default the RDP protocol compresses the data to minimize the amount of data that needs to traverse the network. This compression can be as much as 50 percent for text-based applications such as Microsoft Word and 40 percent less for graphics applications than the uncompressed data streams.

Password={password, $SYS_VAR}

Password to log-in to the application server. Either a conventional login password or a variable can be used. Maximum of 19 characters are allowed.

The value of password is a conventional login password.

The value of $SYS_VAR is a system variable found in Table 1: System Variables.

  • IMPORTANT:

    The application server password is not encrypted; we strongly recommend not to specify it. The user will be prompted to enter the password when the connection is made. This application server password directive never starts a line, so it can be distinguished from the thin client user sign-on password which does starts a line.

  • NOTE:

    The Password option is not written into a {username}.ini file by a user. When the New Password check box is selected, the system writes the new password into the {username}.ini file with encryption.

    This password is then checked against the sign-on password with encryption to determine whether sign-on is successful.

Password-enc=an encrypted password Specifies an encrypted string as a password for a connection.
RDPAudioQualityMode
  • NOTE: DISCONTINUED. DO NOT USE.
RDPAudioRecord={ no, yes}

Default is no.

Yes/no option to specify whether users can record audio to the server. This requires a Windows 7 Server.

Rdp_No_Animation={ no, yes}

Default is no.

Yes/no option to disable the Menu and Window animation feature; use yes to disable the feature.

Rdp_No_Dragging={ no, yes}

Default is no.

Yes/no option to disable the Show content when dragging a window feature; use yes to disable the feature.

Rdp_No_Fontsmoothing={ no, yes}

Default is no.

Yes/no option to disable the Font smoothing feature; use yes to disable the feature.

Rdp_No_Theme={ no, yes}

Default is no.

Yes/no option to disable the Theme feature; use yes to disable the feature.

Rdp_No_Wallpaper={ no, yes}

Default is no.

Yes/no option to disable the Wallpaper feature; use yes to disable the feature.

Reconnect={ no, yes, 1 to 3600 (seconds)}

Default is no.

Controls automatic reconnection to an application after a server disconnection.

yes — Use to restart the connection; the default delay time for yes reconnect is 20 seconds.

no — Use to prevent reconnection after a disconnect.

1 to 3600 — Use an integer value of 1 to 3600 seconds to restart the connection after the delay you want. For example, use 50 and the automatic reconnection to an application will occur after 50 seconds.

Resolution=[ default, <monitor resolution>]

Default is default.

Specifies the connection display resolution.

default — Starts the connection using the current desktop display setting with no window frame and border.

<monitor resolution> — Resolution values you can use in the form XxY. For example: 1024x768 depend on your client. See the Release Notes for your client.

  • NOTE:

    If Using DualHead=Yes and setting this resolution value to Default will start the RDP session in Span Mode. If you want to use only the fullscreen of one monitor use Resolution=DDC. This option is ignored if Fullscreen=Yes

Smartcards={ no, yes}

Default is no.

Yes/no option to use a smart card login server when the connection starts.

TSGWDomainName=[domain] Specifies the TS Gateway Domain for RDP session.
TSGWENABLE={ no, yes}

Default is no.

Yes/no option to enable TS gateway.
TSGWNAME=[hostname] Specifies the TS Gateway host address.
TSGWPassword=[password] Specifies the TS Gateway Password for the RDP session.
TSGWPassword-enc=[encrypted-password] Specifies the encrypted TS Gateway Password for RDP session.
TSGWSERVER=[hostname] Specifies the TS Gateway host address.
TSGWUsername=[username] Specifies the TS Gateway Username for RDP session.
TSGWUsername-enc=[encrypted-username] Specifies the encrypted TS Gateway Username for RDP session.
TSGWUSESAMEINFO={ no, yes}

Default is no.

Yes/no option to apply RDP connection credential to Gateway credential.

UniSession={ no, yes}

Default is no.

Yes/no option to use a unisession—a connection will launch only once at a time.

UnmapClipboard={ no, yes}

Default is no.

Yes/no option to disable clipboard redirection for an RDP session if redirecting the clipboard.

UnmapPrinters={ no, yes}

Default is no.

Yes/no option to not auto-connect to local printers when the connection.

UnmapSerials={ no, yes}

Default is no.

Yes/no option to not auto-connect to local serials when the connection.

UnmapUSB={ no, yes}

Default is no.

Yes/no option to not auto-connect to local USB devices (Virtual USB) when the connection starts.

Username=[username, $SYS_VAR]

Username to log-in to the application server. Either a conventional login username or a variable can be used. Maximum of 31 characters are allowed.

The value of username is a conventional log-on username.

The value of $SYS_VAR is a system variable found in Table: System variables.

  • NOTE:

    The combination of all the variables such as $IP@$DN are also supported.

Username-enc=an encrypted username Specifies an encrypted string as a username for a connection.
[WyseVDA={ no, yes}]

Default is no.

Yes/no option to enable Wyse Virtual Desktop Accelerator for all RDP sessions.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"