Pular para o conteúdo principal
  • Faça pedidos de forma rápida e simples
  • Visualize os pedidos e acompanhe o status de envio
  • Crie e acesse uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.

Dell PowerEdge M830 (For Dell PowerEdge VRTX Enclosure) Owner's Manual

Removing the system cover

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: You must remove the system cover to service other components inside the system.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. Turn off the server module using CMC.

  4. Remove the server module from the enclosure.

  5. Install the I/O connector cover.

Steps

  1. Press the release buttons and slide the cover toward the back of the server module.
  2. Lift the cover away from the server module.
    Figure 1. Removing the system cover
    This figure shows removing the system cover.
    1. system cover
    2. release button (2)
    3. I/O connector cover (2)
    4. alignment guides on the system cover and the chassis

Next steps

  1. Install the system cover.
  2. Follow the procedure listed in the After working inside your system section.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\