- Notes, cautions, and warnings
- Dell PowerEdge M830 (for PowerEdge VRTX) system overview
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- Boot Settings
- Network Settings
- UEFI iSCSI Settings
- System Security
- Secure Boot Custom Policy Settings
- System Information
- Memory Settings
- Processor Settings
- SATA Settings
- Integrated Devices
- Serial Communication
- System Profile Settings
- Miscellaneous Settings
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing server module components
- Safety instructions
- Recommended tools
- Removing and installing a server module
- System cover
- Inside the server module
- Cooling shroud
- Processor blank and DIMM blank
- System memory
- PCIe mezzanine cards
- PCIe mezzanine card support bracket
- Internal dual SD module (optional)
- rSPI card (optional)
- SD vFlash card
- Network daughter card
- Processors
- Hard drives or SSDs
- Hard drive or SSD bay numbering
- Hard drive or SSD installation guidelines
- Removing a hard drive or SSD
- Installing a hard drive or SSD
- Removing a hard drive or SSD blank
- Installing a hard drive or SSD blank
- Shutdown procedure for servicing a hard drive
- Configuring the boot drive
- Removing a 2.5-inch hard drive or SSD from a 2.5-inch hard drive or SSD carrier
- Installing a 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier
- Removing a 1.8-inch SSD from a 1.8-inch SSD carrier
- Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
- Hard-drive or SSD cage
- Hard-drive or SSD backplane
- Removing a 2.5-inch (x4) SAS hard-drive or SSD backplane
- Installing a 2.5-inch (x4) SAS hard-drive or SSD backplane
- Removing a 2.5-inch (x4) SATA hard-drive or SSD backplane
- Installing a 2.5-inch (x4) SATA hard-drive or SSD backplane
- Removing a 2.5-inch (x2) SATA hard drive or SSD plus 2.5-inch (x2) PCIe SSD backplane
- Installing a 2.5-inch (x2) SATA hard drive or SSD plus 2.5-inch (x2) PCIe SSD backplane
- Removing a 1.8-inch (x12) SAS SSD backplane
- Installing a 1.8-inch (x12) SAS SSD backplane
- System battery
- Storage controller card
- Expander card
- System board
- Trusted Platform Module
- Using system diagnostics
- Jumpers and connectors
- Troubleshooting your system
- Getting help
Dell PowerEdge M830 (For Dell PowerEdge VRTX Enclosure) Owner's Manual
SATA Settings details
About this task
- Option
- Description
- Embedded SATA
- Enables the embedded SATA option to be set to Off, ATA, AHCI, or RAID modes. This option is set to AHCI by default.
- Security Freeze Lock
- Sends Security Freeze Lock command to the Embedded SATA drives during POST. This option is applicable only for ATA and AHCI modes.
- Write Cache
- Enables or disables the command for Embedded SATA drives during POST.
- Port A
- Sets the drive type of the selected device. For Embedded
SATA settings in ATA mode, set
this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port B
- Sets the drive type of the selected device. For Embedded
SATA settings in ATA mode, set
this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port C
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port D
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port E
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port F
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port G
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port H
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port I
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port J
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Selecione se o artigo foi útil ou não.
Os comentários não podem conter estes caracteres especiais: <>()\