Dell Chassis Management Controller Version 3.0 for Dell EMC PowerEdge VRTX User's Guide

Configuring Network Share Using CMC Web Interface

1. In the CMC Web interface, in the system tree, go to Server Overview and then click Network Share.
   The Edit Network Share page is displayed.

   NOTE When you have same folder for chassis, server, and boot identity profile, you may see performance issues if there is more than 100 profiles.
2. In the Network Share Settings section, configure the following settings as required:
   • Protocol
   • IP Address or Host Name
   • Share Name
   • Update folder
   • File Name (optional)
     NOTE Entering the File Name is optional only when the default catalog file name is catalog.xml. If the catalog file name is changed then the new name must be entered in this field.
   • Profile Folder
   • Domain Name
   • User Name
   • Password

   For more information, see the CMC Online Help.
3. Click Test Directory to verify whether the directories are readable and writeable.
4. Click Test Network Connection to verify if the network share location is accessible.
5. Click Apply to apply the changes to the network share properties.
   NOTE

   Click Back to return to the Server Component Update page.