Dell Chassis Management Controller Version 3.0 for Dell EMC PowerEdge VRTX User's Guide

PDF

Exported Data

The server inventory report contains data that was most recently returned by each Chassis Group member during the Chassis Group leader’s normal polling (after every 30 seconds).

To get the most accurate server inventory report:

The Chassis Group leader chassis and all Chassis Group member chassis must be in Chassis Power State On.
All servers in the associated chassis must be turned on.

The inventory data for the associated chassis and servers may be missing in inventory report, if a subset of the Chassis Group member chassis are:

In Chassis Power State Off state
Turned off

NOTE If a server is inserted while the chassis is turned off, the model number is not displayed anywhere in the web interface until the chassis is turned on again.

The following table lists the specific data fields and specific requirements for fields to be reported for each server:

Table 1. Server Module Inventory Field DescriptionsThe following table contains descriptions of the server module inventory fields.
Data Field	Example
Chassis Name	Data Center Chassis Leader
Chassis IP Address	192.168.0.1
Slot Location	1
Slot Name	SLOT-01
Host Name	Corporate Webserver NOTE Requires a Server Administrator agent running on the Server; otherwise shown as blank.
Operating System	Windows Server 2008 NOTE Requires a Server Administrator agent running on the Server; otherwise shown as blank.
Model	PowerEdgeM610
Service Tag	1PB8VF1
Total System Memory	4.0 GB NOTE Requires VRTX CMC 1.0 (or later) on member; otherwise shown as blank.
# of CPUs	2 NOTE Requires VRTX CMC 1.0 (or later) on member; otherwise shown as blank.
CPU Info	Intel (R) Xeon (R) CPU E5502 @1.87GHzn NOTE Requires VRTX CMC 1.0 (or later) on member; otherwise shown as blank.