Dell Chassis Management Controller Version 3.0 for Dell EMC PowerEdge VRTX User's Guide

Viewing Storage Capacity and Status of the Storage Components

1. Go to Chassis Overview.
   The Chassis Health page is displayed. The Storage capacity details, the Fault Tolerant Mode (Active/Passive), and Fault Tolerant Status (Enabled) information is displayed on the right pane. This fault-tolerance information is displayed only if the fault tolerant feature is enabled for the storage components.

   The lower section of chassis graphics provides the left view of the chassis. Move the cursor over the storage component sub-graphic. The text hint provides additional information about the storage component. Click the storage component subgraphic to view the related information in the right pane.

2. Alternatively, in the left pane, click Chassis Overview > Storage > Properties > Status.
   The Storage Overview page is displayed with the following information:

   • View the graphic summary of the physical disk drives installed in the chassis and their status.
   • View the summary of all the storage components with links to their respective pages.
   • View the used capacity and total capacity of the storage.
   • View controller information.
     NOTE In case of a fault-tolerant controller, the name format is: Shared <PERC number> (Integrated <number>). For example, the active controller is Shared PERC8 (Integrated 1) and the peer controller is Shared PERC8 (Integrated 2).
   • View recently-logged storage events.

   NOTE For more information, see the Online Help.