Dell Chassis Management Controller Version 3.0 for Dell EMC PowerEdge VRTX User's Guide

Updating Storage Component Using CMC Web Interface

1. In the left pane, click Chassis Overview > Storage > Update.
2. On the Storage Component Update page, click Browse.
   The Choose to Upload File dialog box is displayed
3. Browse to location where the required DUP file was downloaded and saved from the Dell support Site and select the DUP file, and click Open.
   The DUP file name and path are displayed in the Browse field.
4. Click Upload.
   The DUP is uploaded to CMC. The Storage Component Update section displays only the components that are supported by the downloaded DUP file. The current version, latest available version and the Update check box are displayed for the components.
5. Select the appropriate Update check boxes for the required components.
6. Click Update.
   The firmware update action is initiated for the selected components. The progress is displayed in the Update column

   After the action is complete, an appropriate message is displayed to indicate the completion or failure of the firmware update.