This post is more than 5 years old
2 Intern
•
160 Posts
0
5516
how to change the Avamar name to use by clients
I need to change the Avamar hostname that will be used to register new clients.
Could that be the HFS name ?
How can I change this ?
This post is more than 5 years old
2 Intern
•
160 Posts
0
5516
I need to change the Avamar hostname that will be used to register new clients.
Could that be the HFS name ?
How can I change this ?
Top
clevya
117 Posts
1
June 11th, 2014 02:00
Hi,
The Avamar utility node hostname is generally known as the "hfsaddr" in most logs or configuration files.
To change the hostname of an Avamar server you can follow the "Changing Name and IP addressing of Avamar systems document".
Note - although the document is very long if you just need to change the hostname you will find that a lot of the steps will not take very long as no action will be needed (for example changing IPs on all nodes...)
Regards,
Adam
TomLambrechts
2 Intern
2 Intern
•
160 Posts
0
June 11th, 2014 03:00
it's a new server, no clients yet...
Is there a simple way only to change the hostname ?
TomLambrechts
2 Intern
2 Intern
•
160 Posts
0
June 11th, 2014 06:00
Hello Adam,
Went through the procedure... not so difficult... now hoping I didn’t miss anything.
Thanks !
Tom.
clevya
117 Posts
0
June 11th, 2014 06:00
Great good to hear!
Indeed the 20 or so page procedure tends to put people off, but it is not too bad, just that there is a lot of outputs and detail in there.
Adam
clevya
117 Posts
0
June 11th, 2014 06:00
Tom,
No I am afraid not, the hostname is used by a number of processes and databases and simply changing the hostname via the OS only will break a number of things. However if you actually go through the document you will find there are a number of steps (that concern changing the IP) that you can skip over. For example, these could be skipped:
So although the document is rather long - it should not take too long to complete all the tasks.
Regards,
Adam
Russell_Hockey
20 Posts
0
September 29th, 2014 23:00
Does anyone know if there is an update to this document for Avamar version 7 Gen4s nodes ?
pawankumawat
355 Posts
0
September 30th, 2014 06:00
Hello,
I can not see any updated or new document for Avamar 7 specifically. I believe same procedure should work for Avamar 7 as well. Have you tried renaming Avamar system using this document and did you face any issue ?
Regards,
Pawan
Russell_Hockey
20 Posts
0
September 30th, 2014 21:00
I'm certainly not going to "try" this without suitable documentation. I raised an SR and was sent a document that covers the topic for Avamar 7 which is very helpful.
bmurrey-network
48 Posts
0
October 2nd, 2014 09:00
The latest doc on this I have found is this:
EMC Avamar Post-Installation Network Configuration for Avamar 5.x, 6.x, or 7.x Server Software
Technical Note #300-015-091
May 13, 2014
Pages 6 through about 30 something.
Good luck, we are about to do this on a 4 node grid that we have to move to a different DR site...so we have to change the Hostname AND the IP addresses.