Unsolved
This post is more than 5 years old
24 Posts
0
1125
Defragmentation a RAID Group
Dear All,
I have been searching for Defragmentation a RAID Group document. Where can I find one? I want to defragment the Raid Group but now I am not sure about results of it.
Regards,
TKM
I have been searching for Defragmentation a RAID Group document. Where can I find one? I want to defragment the Raid Group but now I am not sure about results of it.
Regards,
TKM
ovivier
142 Posts
0
November 10th, 2008 06:00
Take a look at these interesting threads :
http://forums.emc.com/forums/thread.jspa?messageID=507630
http://forums.emc.com/forums/thread.jspa?messageID=589861
nandas
1.5K Posts
0
November 10th, 2008 06:00
If you unbind and rebind LUNs in a RAID group - you may create unused area or gaps in the contiguous space i.e. fragment the raid group. You may check whether the Raid Group is fragmented or not - by going to the property page of the RAID Group.
Please refer to the "EMC NaviSphere Manager - Administrator Guide" (available on Powerlink) document for more details - please refer to the section of Reconfiguring LUNs, Raid Groups and Storage groups.
Hope this helps,
Sandip
nandas
1.5K Posts
0
November 10th, 2008 06:00
http://forums.emc.com/forums/thread.jspa?messageID=507630
http://forums.emc.com/forums/thread.jspa?messageID=589861
Thanks,
Sandip
ovivier
142 Posts
0
November 10th, 2008 07:00
Many thanks Sandip
nandas
1.5K Posts
0
November 11th, 2008 06:00
Hope the information provided in the replies to your post were helpful. Please feel free to revert back, if you need any more details.
Thanks,
Sandip
TKM3
24 Posts
0
November 12th, 2008 00:00
I am waiting for the customer to give me a go ahead to run Defrag. I will update the thread once everything working.
Thanks so much for the info.
Regards,
TKM